IXIA 400 Traffic Generator w/ LM10GE223M Module
Ixia Embedded Test Systems. Model: LM10GE223M.
- Model
- Ixia LM10GE223M
- Calibration
- Available on request
- Price
- $3,230
- Status
- In stock
- RFQ ref
- LM10GE223M
This unit
The IXIA 400 Traffic Generator with LM10GE223M module is a network testing platform built on a scalable desktop chassis architecture. It delivers 32,000 traffic flows per port with line-rate stateless traffic generation at 10GBASE-R (LAN) data rates. The system performs real-time packet-by-packet latency measurements, QoS emulation, and multilayer protocol analysis across Layers 2–7.
Technical Specifications
Chassis & Architecture- Chassis Type: IXIA 400 Traffic Generator/Analyzer
- Form Factor: Desktop configuration; 4-slot density
- Scalability: Daisy-chain up to 256 chassis with 10 nanosecond synchronization timing Traffic Generation
- Traffic Flows: 32,000 flows per port
- Streams: Up to 256 per port
- Packet Payload: 12 bytes (undersized) to 65,536 bytes (oversized), plus valid and error packets
- Unique Packets: Millions per stream
- Data Rate: 10GBASE-R (LAN) line-rate transmission
- Address Variation: Incrementing, decrementing, or random MAC and IP addressing for simultaneous Layer 2 and Layer 3 testing Traffic Analysis
- Latency Measurement: Real-time, packet-by-packet resolution
- Protocol Scope: Simultaneous multilayer (L2–L7) testing
- Statistics: Graphical and tabular analysis views Protocol Support
- Editors: IP, UDP, IPX, TCP, IGMP, ARP, DHCP, RIP, ISL, MPLS, VLAN 802.1pq, OSPF
- Routing Protocols: BGP-4, OSPF, IS-IS, RIP, MPLS (RSVP-TE, LDP)
- IP Standards: IPv4 and IPv6 wire-speed generation and analysis
- Emulation: Thousands of routers/bridges with millions of reachable networks and hosts
- QoS: Emulation and measurement supported
Key Features
- CPU-based test ports with independent multi-core processors running Linux
- Multi-user remote access for collaborative testing environments
- Compatible with IxExplorer, IxNetwork, and IxLoad applications
Typical Applications
- Ethernet switch and router validation at Layer 2 and Layer 3
- Protocol conformance and performance testing
- QoS and network behavior verification
- Large-scale network emulation and stress testing.
Compatibility & Integration The IXIA 400 supports Ixia's full range of load modules and integrates with industry-standard test applications for protocol, traffic, and application-layer performance analysis.
Ixia LM10GE223M — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Ixia LM10GE223M. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Ixia LM10GE223M faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Ixia LM10GE223M price
This Ixia LM10GE223M is listed at $3,230. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Ixia LM10GE223M calibration cost
NIST-traceable calibration for the Ixia LM10GE223M is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
