Anritsu MG3694C Microwave Signal Generator; 2GHz – 40GHz
Anritsu MG3694C,A versatile microwave signal generator providing output up to 40GHz. It ensures excellent phase noise performance, power control, and frequency agility, making it suitable for demanding R&D tasks and verification of radar and satellite communication systems.
- Model
- Anritsu MG3694C
- Calibration
- Available on request
- Price
- $22,500
- Status
- In stock
- RFQ ref
- MG3694C
This unit
The Anritsu MG3694C is a microwave signal generator delivering precise signal synthesis across 2 GHz to 40 GHz, with extension to 325 GHz via external multipliers. Built for R&D validation, radar verification, and satellite communication testing, it combines excellent phase noise performance with fast frequency agility and comprehensive modulation capabilities.
Technical Specifications Frequency Coverage
Operating range: 2 GHz to 40 GHz
External multiplier extension: Up to 325 GHz
Optional DDS extension: Down to 0.1 Hz (with 0.02 Hz resolution below 10 MHz; power degraded 2 dB in DDS band)
Frequency resolution: 0.01 Hz (standard bands)
Switching speed: 5 ms typical Phase Noise Three configurable performance levels available: Standard, Ultra low phase noise (Option 3), and Premium phase noise (Option 3X). Modulation & Sweep
Modulation modes: AM, FM, Phase, Pulse, and optional IQ via IF input
Scan modulation with external drive
Sweep types: Broadband/narrowband step, phase-locked step, linear/log selectable, fixed-rate, manual stepped, analog, list, and CW power sweep
Trigger modes: Auto, External, Single Signal Control
Up to 20 independent markers (F0–F9, M0–M9)
Phase offset: Adjustable in 0.1-degree steps
10 MHz reference input: ±50 Hz, 0 to +20 dBm (BNC, rear panel)
10 MHz reference output: 1 Vp-p into 50 Ω, AC coupled
Internal timebase: Calibratable to external 10 MHz reference
Key Features
0.01 Hz frequency resolution for precision tuning
Fast 5 ms frequency switching for dynamic test sequences
Selectable phase noise performance tiers to match application demands
Integrated modulation suite handles simple to complex signal simulations
Multiple sweep and trigger options for automated test routines
Typical Applications
Radar system characterization and validation
Satellite communication receiver/transmitter testing
Component and subsystem R&D verification
Phase noise-sensitive measurement campaigns
Compatibility & Integration
Front panel manual control
Remote operation via GPIB (IEEE-488) or Ethernet
Coaxial RF output connector
Rear-panel BNC connectors for reference signals and auxiliary I/O
Rackmount form factor
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2 GHz to 40 GHz (standard) |
| 0.1 Hz to 40 GHz with Option 22 DDS | Power Range (dBm) | 10 MHz reference input: 0 to +20 dBm | Voltage / Current Range: 10 MHz reference input: 0 to +20 dBm |
| 10 MHz reference output | 1 Vp-p into 50 Ω |
Anritsu MG3694C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MG3694C. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu MG3694C faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu MG3694C price
This Anritsu MG3694C is listed at $22,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MG3694C calibration cost
NIST-traceable calibration for the Anritsu MG3694C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
