Anritsu MG3700A Vector Signal Generator, 250 KHz – 3 GHz
Anritsu MG3700A Vector Signal Generator, 250 KHz – 3 GHz,Generates a wide range of modulation formats for RF and wireless signal simulation with precise vector accuracy.
- Model
- Anritsu MG3700A
- Calibration
- Available on request
- Price
- $11,500
- Status
- In stock
- RFQ ref
- MG3700A
This unit
The Anritsu MG3700A is a vector signal generator delivering RF and wireless signal simulation across 250 kHz to 3 GHz, with optional extension to 6 GHz. Built around a 160 MHz sampling-rate arbitrary waveform generator, it produces complex modulation formats with high vector accuracy and phase noise of −125 dBc/Hz at 1 GHz. The instrument combines baseband generation (120 MHz modulation bandwidth internally; 150 MHz via external IQ input) with integrated BERT analysis up to 20 Mbps standard, making it suitable for R&D, manufacturing, and device validation in cellular, wireless LAN, and digital broadcast domains.
Technical Specifications
Frequency & Modulation- Frequency range: 250 kHz to 3 GHz (standard); optional 6 GHz upper limit
- Modulation bandwidth: 120 MHz (internal); 150 MHz (external IQ)
- Frequency resolution: 0.01 Hz
- Phase noise: −125 dBc/Hz at 1 GHz
- Switching speed: 10 ms Signal Generation
- Arbitrary waveform generator: 160 MHz sampling rate
- Waveform memory: 1 GB standard (256 Msamples/channel); 2 GB optional (512 Msamples/channel)
- Output power range: −140 dBm to +13 dBm
- Maximum output power: +10 dBm
- Absolute level accuracy: ±0.5 dB; linearity ±0.2 dB (typical) Analysis & Storage
- Built-in BERT: 1 kbps to 20 Mbps (standard); 100 bps to 120 Mbps (optional)
- Hard disk: 40 GB
- Interface: 100BASE-TX Ethernet for high-speed waveform transmission
Key Features
- IQproducer™ waveform generation software
PC-based tool for pattern creation across LTE/LTE-Advanced, WLAN, Mobile WiMAX, and other standards
ASCII-to-waveform conversion from EDA tools (MATLAB, etc.)
Supported standard patterns: W-CDMA/HSDPA, GSM/EDGE, CDMA2000 1X/1xEV-DO, IEEE 802.11a/b/g, PDC, PHS, Bluetooth®, GPS, ISDB-T/BS/CS/CATV digital broadcast, and AWGN
Optional patterns: TD-SCDMA, Public Radio Systems (RCR STD-39, ARIB variants), DFS radar, ISDB-Tmm
Typical Applications Digital mobile communication system development and test; cellular device validation; wireless LAN equipment qualification; digital broadcast signal simulation.
Physical Benchtop form factor.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 250 kHz to 3 GHz (standard) |
| optional 250 kHz to 6 GHz | Power Range (dBm) | −140 dBm to +13 dBm |
Anritsu MG3700A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MG3700A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MG3700A price
This Anritsu MG3700A is listed at $11,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MG3700A calibration cost
NIST-traceable calibration for the Anritsu MG3700A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
