Anritsu MS2726C – Spectrum Master- Handheld Spectrum Analyzer; 9 kHz to 43 GHz
Anritsu Spectrum Analyzers. Frequency range: 9 kHz to 43 GHz, Accuracy: ±25 ppb with GPS on, Bandwidth: 1 Hz to 10 MHz.
- Model
- Anritsu MS2726C
- Calibration
- Available on request
- Price
- $17,500
- RFQ ref
- MS2726C
This unit
The Anritsu MS2726C Spectrum Master is a handheld spectrum analyzer built for field RF and microwave measurements across 9 kHz to 43 GHz. It delivers the measurement depth of bench instruments in a portable platform, combining synthesis-based tuning with dual-detector architecture to resolve weak signals amid interference. Engineers deploy this analyzer for spectrum monitoring, interference investigation, channel power validation, and modulation assessment in wireless systems.
Technical Specifications Frequency Performance
Frequency range: 9 kHz to 43 GHz
Frequency accuracy: ±25 ppb with GPS on; ±50 ppb for three days post-GPS disconnection
Resolution bandwidth: 1 Hz to 10 MHz
Phase noise: –100 dBc/Hz @ 10 kHz offset at 1 GHz Amplitude & Dynamic Range
Displayed average noise level: –160 dBm in 1 Hz RBW
Dynamic range: > 104 dB in 1 Hz RBW
Detectors: Peak, negative, sample, quasi-peak, and true RMS
Markers: 6 markers with individual deltas, or 1 reference with 6 delta markers
Limit lines: Up to 40 segments with one-button envelope creation Measurement Set
Standard: Occupied bandwidth, channel power, ACPR, C/I ratio
Demodulation modes: AM/FM/SSB with RF spectrum, audio spectrum, audio waveform, and summary parameters
Interference tools: Spectrogram, signal strength, RSSI
Optional high-accuracy power meter: –40 dBm to +51.76 dBm with ±0.18 dB uncertainty using external USB sensors System Integration
Display: 8.4-inch, 800 × 600 resolution
Warm-up time: < 5 minutes
Battery life: 2.5 hours
Data connectivity: Ethernet/USB
GPS tagging and trace save-on-event enabled
Internal preamplifier standard; zero-span IF output available
Channel scanner: 20 channels; burst detect and gated sweep available
Key Features
Fast sweep mode with minimal RBW-to-speed tradeoff from 10 MHz down to 30 kHz
Dual-marker architecture with reference and delta tracking
Envelope limit-line creation for rapid compliance assessment
AM/FM/SSB demodulation with audio and RF spectrum analysis (option 509)
Location-stamped measurement storage via integrated GPS
Typical Applications
Spectrum monitoring and band occupancy surveys
Co-channel and adjacent-channel interference identification
Modulation quality and audio fidelity assessment in analog systems
Power measurement and in-band/out-of-band compliance validation
Channel scanner operation for multi-signal environments
Compatibility & Integration Data export via USB and Ethernet. External sensor support for high-accuracy power measurement. GPS antenna connector for location tagging and frequency holdover.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 9 kHz to 43 GHz | Power Range (dBm): '-40 dBm to +51.76 dBm (optional power meter), –160 dBm (DANL in 1 Hz RBW) |
Anritsu MS2726C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS2726C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS2726C price
This Anritsu MS2726C is listed at $17,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS2726C calibration cost
NIST-traceable calibration for the Anritsu MS2726C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
