Anritsu MS2760A-0050 – Spectrum Master, Ultraportable Spectrum Analyzer; 9 kHz to 50 GHz

The Anritsu MS2760A-0050 is an ultraportable spectrum analyzer delivering continuous frequency coverage from 9 kHz to 50 GHz in a pocket-sized form factor. Equipped with a 1.85mm Type V(m) connector and USB 3.0 interface, this instrument connects directly to devices under test, eliminating external cable losses and maximizing measurement fidelity. Dynamic range exceeds 100 dB, with displayed average noise levels as low as −134 dBm across the 4 to 40 GHz band. The analyzer employs Anritsu's patented Non-Linear Transmission Line (NLTL) technology to deliver high performance-to-cost efficiency compared to traditional benchtop systems.

Technical Specifications

Frequency Range: 9 kHz to 50 GHz

Dynamic Range: Greater than 100 dB (>103 dB from 6.15 GHz to 110 GHz)

Displayed Average Noise Level (DANL): −134 dBm (4–40 GHz); −127 dBm (up to 110 GHz); −141 dBm (to 90 GHz, MS2762A models)

Resolution Bandwidth: 1 Hz to 3 MHz or 10 Hz to 3 MHz

Sweep Time: Under 12 seconds (110 GHz sweep)

Traces: Up to 6 traces with up to 3 trace detectors

Markers: Up to 12 markers

Connector Type: 1.85mm Type V(m), compatible with SMA and 3.5 mm adapters

Input-Related Spurious: −50 dBc at 28 MHz and 35 MHz offsets; −35 dBc at 770 MHz and 910 MHz offsets; <−60 dBc all other frequencies (referenced to −10 dBm CW input)

Image Rejection: Configurable for upper or lower mixing products; disabled in zero span mode

Key Features

USB-powered operation via USB 3.0 interface

Channel Power, Adjacent Channel Power, and Occupied Bandwidth measurements

Operating temperature range: 0°C to +50°C

Direct wafer probe mounting capability via integrated mounting holes

Windows-based software control via PC, laptop, or tablet

Typical Applications 5G network development, 802.11ad/WiGig, E-band microwave wireless, satellite communications, automotive radar, antenna beam pattern testing, 6G research, IoT and medical device wireless, data center applications, high-speed digital systems, and installation and maintenance.

Compatibility & Integration The analyzer integrates via USB 3.0 for both control and power delivery. Connector compatibility with SMA and 3.5 mm standards enables field-deployed measurement configurations across multiple test environments.