Anritsu MS710C
The Anritsu MS710C is a spectrum analyzer. It features a frequency range of 10 kHz to 23 GHz, offering comprehensive signal analysis capabilities. Ideal for testing and measuring various RF and microwave signals.
- Model
- Anritsu MS710C
- Calibration
- Available on request
- Price
- $1,800
- RFQ ref
- MS710C
This unit
The Anritsu MS710C is a microwave spectrum analyzer engineered for signal analysis from 10 kHz to 23 GHz, with optional external mixer capability extending to 140 GHz. It delivers the frequency resolution, dynamic range, and measurement accuracy required for RF/microwave development, production testing, interference analysis, and research applications.
Technical Specifications Frequency Coverage
Standard bands: 100 kHz to 2 GHz, 1.7 to 23 GHz
Optional extended range: up to 140 GHz with external mixers
Frequency accuracy: 30 kHz / 6.5 GHz (PLL synthesizer local oscillator) Resolution & Selectivity
Resolution bandwidth: 100 Hz to 3 MHz (manually selectable or span-coupled)
1 kHz RBW yields 6 dB selectivity (70 dB/3 dB)
Frequency span: 1 kHz to 3 MHz/division with fine resolution control Dynamic Range & Distortion
Average noise floor: -95 dBm (100 kHz to 1 MHz); -115 dBm (1 to 30 MHz)
Second harmonic distortion: ≤ -100 dB
Two-signal 3rd intermodulation distortion: ≤ -70 dB (300 kHz to 15 MHz, -30 dBm input)
Residual response: ≤ -70 dB (10 to 100 kHz, -30 dBm input) Sweep & Acquisition
Sweep time: 2 ms/division to 10 s/division (manual or auto-coupled)
Trigger modes: Freerun and TTL with external/internal source selection
Key Features
Dual-channel digital memory with simultaneous display of two datasets
Subtraction results and processing functions (MAX HOLD, AVERAGING)
Storage and recall of up to 9 measurement sets with conditions
Input attenuator with adjustable level subtraction for distortion calculations
Type N connector input
Typical Applications RF/microwave component characterization, harmonic and intermodulation analysis, EMI/RFI investigation, transmitter and receiver testing, and laboratory measurement systems.
Compatibility & Integration GPIB interface supports both manual operation and full computer-controlled automation for building integrated test systems. Compact bench-top form factor: 425 mm W × 190 mm H × 495 mm D, 25 kg.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 kHz to 23 GHz (standard) |
| up to 140 GHz with external mixers | Power Range (dBm) | '-95 dBm to -115 dBm (noise floor) |
Anritsu MS710C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MS710C. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MS710C price
This Anritsu MS710C is listed at $1,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MS710C calibration cost
NIST-traceable calibration for the Anritsu MS710C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
