Anritsu MU100011A – Multirate Module, 100G For MT1000A Series Network Master Pro

The Anritsu MU100011A is a 100 Gbps multirate module engineered for the MT1000A Series Network Master Pro mainframe. This module extends testing capabilities across speeds from 10 Mbps to 100 Gbps, supporting Ethernet, OTN, Fibre Channel, SDH/SONET, CPRI/OBSAI, and mobile fronthaul/backhaul technologies. Deployed in field and laboratory environments, it delivers layer 2–7 analysis, performance verification per RFC 2544, Y.1564, and RFC 6349 standards, plus timing and synchronization validation via PTP (IEEE 1588 v2).

Technical Specifications Speed Range

10 Mbps to 100 Gbps Optical and Electrical Interfaces

1 × Tx/Rx CFP4

2 × Tx/Rx SFP/SFP+/SFP28

1 × Tx/Rx QSFP+/QSFP28

2 × Tx/Rx RJ45 (electrical)

1 × Synchronous Clock Output Capture Buffer

1 MByte to 128 MByte (10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps)

512 kbytes (25 Gbps, 40 Gbps, 100 Gbps)

Timestamp resolution: 100 ns

Capture frame slicing: first 64 or 128 bytes per frame

Trigger modes: manual, on error, field match

Error detection: fragmented, oversize, undersized frames; FCS errors

Key Features Ethernet Testing

Up to 100 Gbps, including 25 Gbps and 100 Gbps standards

25GigE and 100GigE RS-FEC support

RFC 2544, Y.1564, and RFC 6349 (up to 10 Gbps) compliance testing Optical Transport Network (OTN)

OTU4 and lower rate support

Multistage mapping and ODUflex testing

Flexible client-signal bandwidth allocation Mobile Fronthaul/Backhaul

CPRI/OBSAI up to 6.144 Gbps

eCPRI and IEEE 1914.3 frame testing

High-resolution latency measurement

Synchronous Ethernet (SyncE) and PTP analysis

BER testing, error/alarm detection, return delay validation Fibre Channel

1 Gbps to 16 Gbps rates

Compatibility & Integration The MU100011A integrates with the MT1000A mainframe. Optional GPS receiver (G0325A) enables one-way latency measurements in Ethernet tests; MU100090B provides reference timing support.