Emerson / Motorola MVME147A-1 25 MHz, 8MB 2-Slot Single Board Computer
Emerson / Motorola VME Modules. Model: MVME147A-1.
- Model
- Emerson / Motorola MVME147A-1
- Calibration
- Available on request
- Price
- $1,750
- RFQ ref
- MVME147A-1
This unit
The Emerson/Motorola MVME147A-1 is a single-height 6U VMEbus single-board computer delivering 32-bit processing at 25 MHz for industrial control, real-time embedded, and data acquisition systems. Built around the Motorola MC68030 enhanced microprocessor with on-chip cache and supported by an optional MC68882 floating-point coprocessor, this module integrates 8 MB of DRAM, 4K×8 SRAM, and battery-backed time-of-day clock functionality on a single compact board. The MVME147A-1 reduces external module count through on-board Ethernet (AMD AM7990 Lance 10Mb MAC), SCSI (WD33C93B narrow SE controller), four EIA-232-D serial ports, one 8-bit parallel interface, I2C, and SPI support. VMEbus system control capabilities - including arbiter (round-robin/priority selectable), global time-out timer, and System Controller functionality via jumperable configuration - enable flexible integration into larger VME architectures. Diagnostic firmware and dual 16-bit timers plus watchdog timer provide essential embedded system supervision.
Technical Specifications Processor & Memory
Motorola MC68030 32-bit microprocessor @ 25 MHz
MC68882 floating-point coprocessor support (16, 25, or 33.33 MHz)
8 MB DRAM
4K×8 SRAM
Four 28/32-pin ROM/PROM/EPROM/EEPROM sockets
MK48T02 non-volatile RAM with integrated clock VMEbus Interface
ANSI/VITA 1-1994 VME64 (IEEE STD 1014) compliant
VMEchip ASIC-based VMEbus controller with System Controller and Arbiter modes
Global time-out timer Communications & Networking
Four EIA-232-D serial ports (85C30 controller)
10 Mb Ethernet MAC (AMD AM7990 Lance) with Intel LXT901 SIA
WD33C93B narrow SCSI bus controller
One 8-bit Centronics-compatible parallel port (PCC ASIC)
I2C and SPI bus support Peripherals
Two 16-bit timers/counters
Watchdog timer
Battery-backed time-of-day clock
On-board diagnostic firmware
PCCchip and GCCchip ASICs for integrated control Physical
Single-height 6U form factor
233.4 mm H × 160.0 mm D × 19.8 mm W
Operating temperature: 0°C to 55°C (forced air cooling)
Key Features
MC68030 on-chip cache enhances instruction throughput and reduces external memory bandwidth requirements
Integrated Ethernet and SCSI eliminate dedicated expansion modules
Four serial ports support legacy industrial protocols and multi-device configurations
VMEchip ASIC reduces discrete logic and improves reliability
Jumperable System Controller role enables deployment as primary or secondary node
Non-volatile RAM with clock backs up critical timing and parameter data across power cycles
Typical Applications
Real-time process control and instrumentation
Industrial embedded systems requiring 10 Mb networking
VME-based test equipment and data loggers
Systems demanding legacy serial and modern Ethernet coexistence
Compatibility & Integration The MVME147A-1 runs VxWorks, LynxOS, OS-9, VRTX-32, pSOS+, and Motorola System V/68. Optional MVME712M transition module enables standard I/O connections.
Emerson / Motorola MVME147A-1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Emerson / Motorola MVME147A-1. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Emerson / Motorola MVME147A-1 price
This Emerson / Motorola MVME147A-1 is listed at $1,750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Emerson / Motorola MVME147A-1 calibration cost
NIST-traceable calibration for the Emerson / Motorola MVME147A-1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →