Rohde and Schwarz NRP-Z31 Three-Path Diode Power Sensor, 33 GHz
Rohde & Schwarz RF Power Sensors. Frequency Range: 10 MHz to 33 GHz, Dynamic Range: Up to 90 dB for CW and modulated signals, Bandwidth: 100 kHz (trace and timeslot modes).
- Model
- Rohde & Schwarz NRP-Z31
- Calibration
- Available on request
- Price · starting from
- $5,800
- Status
- In stock
- RFQ ref
- NRP-Z31
This unit
The Rohde & Schwarz NRP-Z31 is a three-path diode power sensor designed for precise power measurements across RF and microwave applications. It delivers a dynamic range of 90 dB for both CW and modulated signals, supporting continuous average, burst average, timeslot average, time gating, and trace measurement modes. The sensor operates from 10 MHz to 33 GHz with a 3.5 mm connector and achieves up to 1500 measurements per second in buffered mode.
It integrates with Rohde & Schwarz NRP2 base units or connects directly to a PC or laptop via USB, making it suitable for wireless standards testing (LTE, 3GPP, GSM, WiMAX, WLAN), automotive radar development at 24 GHz, and satellite communication system maintenance. The sensor compensates for cable losses, reflections, and other interfering effects using offset, S-parameter, and Γ correction techniques.
Technical Specifications
- Measurement Range: –67 dBm to +23 dBm (200 pW to 200 mW)
- CW Power: –67 dBm to +23 dBm
- Burst Average Power: –37 dBm to +23 dBm
- Timeslot/Gate Average Power: –62 dBm to +23 dBm
- Frequency Range: 10 MHz to 33 GHz
- Dynamic Range: Up to 90 dB for CW and modulated signals
- Video Bandwidth: 100 kHz (trace and timeslot modes)
- Connector Type: 3.5 mm
Key Features
- Automatic burst detection and acquisition
- Low sensitivity to harmonics
- Measurement rate up to 1500/s in buffered mode
- Offset, S-parameter, and Γ correction for cable loss and reflection compensation
- Compatible with R&S NRP Toolkit software and R&S NRPV Virtual Power Meter software
Typical Applications
- Automotive radar development and production
- Wireless standards verification (LTE, 3GPP, GSM, WiMAX, WLAN)
- Satellite communication system installation and maintenance
- Average power measurement of modulated signals
Compatibility & Integration
- Operates with Rohde & Schwarz NRP2 base units
- Direct USB connection to PC or laptop
- Compatible with R&S signal generators, analyzers, and network analyzers
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 33 GHz | Power Range (dBm): '-67 dBm to +23 dBm |
Rohde & Schwarz NRP-Z31 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz NRP-Z31. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Rohde & Schwarz NRP-Z31 price
This Rohde & Schwarz NRP-Z31 is listed at $5,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz NRP-Z31 calibration cost
NIST-traceable calibration for the Rohde & Schwarz NRP-Z31 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →