Kikusui PAD35
Kikusui DC Power Supplies. Voltage: ** 0–35 VDC, Current: ** 5 A, Voltage: ** 120 VAC ±10% or 120/240 VAC ±10%.
- Model
- Kikusui PAD35
- Calibration
- Available on request
- Price
- $750
- Status
- In stock
- RFQ ref
- PAD35
This unit
The Kikusui PAD35 is a variable DC regulated power supply engineered for research, development, industrial testing, and manufacturing applications. This benchtop/rack-mountable unit delivers 0–35 VDC output with selectable current ratings from 5 A to 200 A, depending on model. It operates in constant voltage (CV) and constant current (CC) modes with thyristor preregulation and power transistor series regulation, yielding low harmonic distortion and high efficiency. Input options include 120 VAC ±10% (50/60 Hz) or dual-voltage 120/240 VAC ±10% configurations. The PAD35 achieves line regulation of 0.005% and load regulation of 0.005%, with exceptional temperature stability at 50 ppm/°C and superior aging drift characteristics. A wide-band error amplifier enables fast transient response and tight frequency control. The choke input circuit reduces AC line waveform distortion and improves power factor, particularly at low output voltages. Front-panel voltage adjustment spans 0 V to rated output via 10-turn potentiometer; constant current uses coarse and fine adjustment knobs. Standard overvoltage protection (OVP) is adjustable from the front panel, with optional high-speed thyristor crowbar protection available for narrow-tolerance loads. Integrated overcurrent detection, overheating protection, and thermal management via forced air cooling safeguard the supply and connected equipment. Low ripple and noise output ensures clean power delivery to sensitive devices. Japanese manufacturing.
Technical Specifications
Output Voltage: 0–35 VDC
Output Current: 5 A, 10 A, 20 A, 30 A, 50 A, 60 A, 100 A, 200 A (model-dependent)
Input Voltage: 120 VAC ±10% or 120/240 VAC ±10%, 50/60 Hz (selectable)
Line Regulation: 0.005% (10% input variation)
Load Regulation: 0.005%
Temperature Coefficient: 50 ppm/°C
Topology: Constant voltage/constant current with thyristor preregulation and power transistor series regulation
Cooling: Forced air
Key Features
Finely adjustable 0–35 VDC output (10-turn potentiometer)
Dual-mode constant current with coarse/fine control
Fast transient response via wide-band error amplifier
Low harmonic distortion and reduced AC line waveform distortion (choke input system)
Improved power factor at low output voltages
Adjustable front-panel overvoltage protection with optional thyristor crowbar circuit
Overcurrent and overheating protection with internal voltage, current, and temperature detection
Low ripple and noise output
Typical Applications
Research and development testing
Industrial manufacturing and process control
Device characterization and burn-in
Load simulation and validation
Sensitive equipment powering
Compatibility & Integration Benchtop and rack-mountable configurations available. PAD-L and PAD-LP series platforms. 50/60 Hz input operation. Selectable input voltage options accommodate regional power standards.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–35 Vdc, 5 A to 200 A (model-dependent) |
Kikusui PAD35 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kikusui PAD35. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kikusui PAD35 price
This Kikusui PAD35 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kikusui PAD35 calibration cost
NIST-traceable calibration for the Kikusui PAD35 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
