Corelis PCI-1149.1 JTAG Scan Controller Module
Corelis Embedded Test Systems. Model: PCI-1149.1.
- Model
- Corelis PCI-1149.1
- Calibration
- Available on request
- Price
- $1,650
- Status
- In stock
- RFQ ref
- PCI-1149.1
This unit
The Corelis PCI-1149.1 is a JTAG scan controller module for PCI bus systems, enabling in-system programming, boundary-scan testing, and device diagnostics. IEEE 1149.1 compliant, it delivers user-programmable JTAG TCK speeds up to 80 MHz and supports direct programming of I2C and SPI-based devices. The module accommodates CPLDs, Flash memories, serial PROMs, and FPGAs across concurrent testing and in-system programming workflows.
Technical Specifications
Interface: 32-bit PCI bus
JTAG Compliance: IEEE 1149.1 Standard
JTAG TCK Speed: User-programmable up to 80 MHz
Supported Devices: CPLDs, Flash memories, serial PROMs, FPGAs
Programming Protocols: JTAG, direct I2C and SPI programming
I/O Capabilities: External write strobe and Ready/Busy signaling for Flash programming; 16 inputs and 16 outputs of programmable parallel I/O (PCI-1149.1/Turbo variant)
Output Voltage (Variable on some models): Programmable from 1.25 V to 3.30 V in 0.05 V steps
Threshold Voltage (Variable on some models): Programmable from 0.00 V to 3.30 V in 0.05 V steps
TAP Support: Up to 32 Test Access Ports when used with compatible ScanTAP series pods
Cable Length: SCSI ribbon cable up to 30 feet for pod connectivity
Key Features
Concurrent (gang) testing and in-system programming (ISP)
Monitoring of Flash RDY/BSY signals
JTAG Embedded Test for microprocessor control without boot code
SCSI ribbon cable connection to intelligent pods
Typical Applications Boundary-scan testing, CPLD and Flash device programming, FPGA validation, serial PROM updates, and microprocessor diagnostics in production and field environments.
Compatibility & Integration Operating Systems: Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit), Linux Software: Compatible with Corelis ScanExpress family, including ScanExpress Runner Pod Integration: Works with Corelis ScanTAP intelligent pods for expanded TAP capacity
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 80 MHz | Voltage / Current Range: 0.00 V to 3.30 V (threshold), 1.25 V to 3.30 V (output) |
Corelis PCI-1149.1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Corelis PCI-1149.1. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Corelis PCI-1149.1 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Corelis PCI-1149.1 price
This Corelis PCI-1149.1 is listed at $1,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Corelis PCI-1149.1 calibration cost
NIST-traceable calibration for the Corelis PCI-1149.1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
