Kikusui PCR2000
Kikusui Programmable AC Power Source. Voltage: 0–155 V / 0–310 V (selectable), Voltage: ±0–219 V / ±0–438 V, Current: 20 A (155 V range).
- Model
- Kikusui PCR2000
- Calibration
- Available on request
- Price
- $4,200
- Status
- In stock
- RFQ ref
- PCR2000
This unit
The Kikusui PCR2000MA is a 2000 VA AC/DC power source delivering precise, programmable power for electronic device testing across laboratory, research, and manufacturing environments. Built on PWM inverter technology, It has compact form factor with selectable output modes
AC, DC, AC+DC, EXT-AC, and EXT-DC - supporting power factors from 0 to 1. Voltage response speed reaches 60 μs with output waveform distortion below 0.5%, enabling demanding transient and steady-state test scenarios. The unit includes onboard measurement of voltage, current, and power metrics via True RMS and peak detection, with extended analysis (apparent power, reactive power, power factor, crest factor) available through LAN or USB control. Memory storage for up to 11 test configurations enables rapid protocol switching without output interruption. Built-in web server and dual-range voltage selection (0–155 V or 0–310 V) provide flexibility for a broad spectrum of DUT requirements. Optional GPIB connectivity and analog interface board (EX08-PCR-MA) support external voltage/current command modes.
Technical Specifications
Output capacity: 2000 VA
AC output voltage: 0–155 V / 0–310 V (selectable)
DC output voltage: ±0–219 V / ±0–438 V
Output frequency: 40 Hz to 500 Hz
Maximum current: 20 A (155 V range), 10 A (310 V range)
Peak current capability: 3× rated RMS
Input voltage: 90–132 Vac / 180–264 Vac (auto-sensing)
Voltage response speed: 60 μs
Output waveform distortion: <0.5%
Physical: 429 × 128 × 450 mm, 16 kg; bench or rack-mountable
Key Features
Phase angle control in AC mode; zero-cross phase-off switching
Remote sensing for load-end voltage compensation
3 front-panel memory sets; 11 programmable memory areas via remote interface
True RMS, peak, and average (DC) current/voltage displays
Protective functions integrated
LAN (LXI-compliant) and USB standard; optional GPIB
Backward-compatible with PCR-M series control programs
Typical Applications
Power supply stress testing and margin analysis
Transient response evaluation
Harmonic and waveform quality assessment
DC/AC power mode transition testing
Compatibility & Integration LAN and USB interfaces support remote programming and data acquisition. Optional EX08-PCR-MA analog interface board enables EXT-AC and EXT-DC external command modes. Built-in web server permits browser-based control and monitoring.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 40 Hz to 500 Hz | Voltage / Current Range: 20 A @ 155 V range, AC: 0–155 V / 0–310 V |
| DC | ±0–219 V / ±0–438 V |
Kikusui PCR2000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kikusui PCR2000. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kikusui PCR2000 price
This Kikusui PCR2000 is listed at $4,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kikusui PCR2000 calibration cost
NIST-traceable calibration for the Kikusui PCR2000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
