KGS Electronics SPC-6-1000-3PH Solid State Frequency Changer
KGS Electronics Programmable AC Power Source. Voltage: 115 VAC ± 15 VAC.
- Model
- KGS Electronics SPC-6-1000-3PH
- Calibration
- Available on request
- Price
- $3,200
- Status
- In stock
- RFQ ref
- SPC-6-1000-3PH
This unit
The KGS Electronics SPC-6-1000-3PH is a solid-state frequency changer that converts single-phase 115 VAC, 50/60 Hz input into three-phase 400 Hz sine wave output for avionic test bench applications. This unit delivers stable three-phase power to equipment such as radars, compasses, gyros, and synchros that demand precision 400 Hz excitation.
Technical Specifications Input Power
Voltage: 115 VAC ± 15 VAC
Frequency: 50/60 Hz, single-phase
Overvoltage protection: Automatic shutdown above 135 VAC
Overcurrent protection: 20 Amp circuit breaker (input power on/off switch) Output Power
Frequency: 400 Hz (adjustable 380 to 420 Hz)
Three-phase sine wave output
Voltage selections: - 115/200 VAC line-to-line (173 to 216 VAC adjustable) - 115/200 VAC line-to-neutral (100 to 125 VAC adjustable) - 26/45 VAC line-to-line (39.1 to 48.8 VAC adjustable) - 26/45 VAC line-to-neutral (22.6 to 28.2 VAC adjustable)
Total output power: 1000 VA at 115 VAC (330 VA per phase); 225 VA at 26 VAC (75 VA per phase)
Waveform distortion: 2% THD typical
Power factor: 0.8 to −0.95 Protection & Overload
Delivers 150% overload for minimum 5 minutes
Withstands short circuits for minimum 1 minute
Shutdown thresholds: Below 375 Hz (under frequency), above 425 Hz (over frequency), above 130 VAC (over voltage) Physical & Environmental
Operating temperature: −40°C to +71°C
Thermostatically controlled internal fan cooling
Dimensions (19" relay rack mount): 17"W × 13"D × 7"H
Weight: 35 lbs
Front panel connector: MS3106A24-11P
Rear panel: 6-32 terminal block
Key Features
Adjustable frequency and voltage output
Compact rack-mount form factor
Wide operating temperature range
Short-circuit and overload rated
Low harmonic distortion (2% THD)
Typical Applications Test bench verification of three-phase avionic systems including navigation compasses, heading gyroscopes, synchro equipment, and radar platforms requiring stable 400 Hz excitation.
Compatibility & Integration Alternative models SPC-6-1000-3PH-230 and SPC-6-1000-3PHC support 230 VAC, 50 Hz input operation.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 50/60 Hz input |
| 380 to 420 Hz output (nominal 400 Hz) | Voltage / Current Range | 115 VAC ± 15 VAC input |
KGS Electronics SPC-6-1000-3PH — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the KGS Electronics SPC-6-1000-3PH. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
KGS Electronics SPC-6-1000-3PH price
This KGS Electronics SPC-6-1000-3PH is listed at $3,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
KGS Electronics SPC-6-1000-3PH calibration cost
NIST-traceable calibration for the KGS Electronics SPC-6-1000-3PH is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
