Advantest R3754B – Network Analyzer, 10 kHz to 150 MHz
Advantest R3754B,Low-frequency network analyzer supporting 10 kHz to 150 MHz range. Enables precise impedance, return loss, and transmission measurements for components and circuits. Compact form factor and intuitive controls make it suitable for electronics development, filter tuning, and educational use. Provides stable performance with minimal calibration requirements.
- Model
- Advantest R3754B
- Calibration
- Available on request
- Price
- $3,190
- RFQ ref
- R3754B
This unit
The Advantest R3754B is a vector network analyzer operating from 10 kHz to 150 MHz, delivering high-speed S-parameter measurements with simultaneous dual-device capability. The instrument achieves 127 dB dynamic range at 1 kHz RBW and up to 130 dB typical, with sweep speeds of 50 µs/point at 15 kHz RBW. Two-channel, four-trace architecture enables parallel characterization of two devices with full S11, S21, S12, S22 measurements per port.
Frequency accuracy of ±5 ppm (±0.0005%) and resolution to 0.1 Hz support precision RF design validation and component testing across baseband and low-frequency RF domains.
Technical Specifications
Measurement Performance- Frequency range: 10 kHz to 150 MHz
- Frequency resolution: 0.1 Hz
- Frequency accuracy: ±5 ppm (±0.0005%)
- S-parameters: S11, S21, S12, S22 (2-port)
- Dynamic range: 127 dB @ 1 kHz RBW; up to 130 dB typical
- Sweep speed: 50 µs/point @ 15 kHz RBW; 0.05 ms/point
- Trace noise: 0.0025 dBrms typical
- Temperature stability: 0.01 dB/°C typical
- Resolution bandwidth: 15 kHz, 1 kHz, 10 Hz typical Output Characteristics
- Power range: 0.0005 mW to 125.89 mW
- Source impedance: 50 Ω Calibration & Error Correction
- Normalization, 1-port, 2-port, and 3-port calibration modes
- Multi-marker function (up to 16 markers) with search capability
- Limit line testing: 32-segment PASS/FAIL configuration
Key Features
- Dual-channel simultaneous measurement with four-trace display
- 6.5-inch and 12.1-inch TFT color display options with brightness control
- GPIB (IEEE 488.1/488.2) and LAN (10 Base-T) interfaces
- Parallel I/O, serial port, IEEE-1284-1994 printer port
- External reference input: 1, 2, 5, 10 MHz (±10 ppm), 0 dBm @ 50Ω
- Probe power supply: ±15 V ±0.5 V, 300 mA
- Data storage in MS-DOS format
Compatibility & Integration
- Power supply: 100–120 VAC or 220–240 VAC, 50/60 Hz (auto-switching)
- Power consumption: 200 VA or 500 VA maximum
- Operating temperature: 0 to 40°C
- Storage temperature: –20 to +60°C
- Dimensions: 424 W × 177 H × 300 D mm
- Mass: 12 kg or less
- PS/2 keyboard and mouse support
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 kHz to 150 MHz | Power Range (dBm): 0.0005 mW to 125.89 mW output |
| 0 dBm external reference input | Voltage / Current Range | 100–120 VAC or 220–240 VAC, 50/60 Hz |
Advantest R3754B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Advantest R3754B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Advantest R3754B price
This Advantest R3754B is listed at $3,190. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Advantest R3754B calibration cost
NIST-traceable calibration for the Advantest R3754B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
