Rohde and Schwarz RT-ZPR40 Power Rail Active Probe, 0 Hz to 4 GHz

Rohde & Schwarz Power Sensors. Bandwidth: DC to 4.0 GHz, Voltage: ±0.85 V, Dynamic Range: ±60 V.

Model
Rohde & Schwarz RT-ZPR40
Calibration
Available on request
Price · starting from
$6,160
Status
In stock
RFQ ref
RT-ZPR40
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Rohde & Schwarz RT-ZPR40 is an active power rail probe designed for precision power integrity measurements across DC to 4.0 GHz bandwidth. It delivers high-fidelity capture of fast transient events and high-frequency noise on power rails while maintaining very low added noise - only 10% above oscilloscope baseline. The 1:1 attenuation ratio and 50 kΩ input impedance minimize circuit loading while accommodating DC offset voltages up to ±60 V.


Signal handling capacity reaches ±0.85 V with offset compensation to ±60 V, supporting non-destructive inputs to ±60 V DC or ±5 V AC peak.


Technical Specifications



  • Bandwidth: DC to 4.0 GHz

  • Attenuation Factor: 1:1

  • Input Impedance: 50 kΩ

  • Maximum Signal Voltage: ±0.85 V

  • Offset Compensation Range: ±60 V

  • Maximum Non-Destructive Input: ±60 V DC or ±5 V AC (peak)

  • AC Coupling Low-Frequency Cutoff: 10 Hz

  • Added Noise: 10% above oscilloscope noise floor

  • ProbeMeter Dynamic Range: ±60 V

  • ProbeMeter Accuracy: < 0.1 %


Key Features



  • Integrated ProbeMeter displays DC voltage, ripple, noise, and settling transients directly on the oscilloscope display

  • High impedance (50 kΩ) minimizes loading effects on measured circuits

  • AC coupling capability with 10 Hz low-frequency cutoff for ripple and transient analysis

  • Comprehensive accessory kit: ground leads with alligator clips, ground springs, IC caps, spring tips, micro SMD clip, flexible ground lead, and multiple probe tips for diverse board topologies


Typical Applications



  • Power rail ripple and noise characterization

  • Transient response measurement during load switching

  • Power supply voltage tolerance verification

  • High-frequency noise detection in presence of large DC offsets


Compatibility & Integration Connects via Rohde & Schwarz probe interface to compatible oscilloscopes including TM3000, RTA4000, MXO, RTE, RTO6, and RTP Series models. Operates from 0 to 40 °C. Includes 1 m SMA cable for accessory connections.

Rohde &amp; Schwarz RT-ZPR40 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Rohde &amp; Schwarz RT-ZPR40. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Rohde &amp; Schwarz RT-ZPR40 price

This Rohde &amp; Schwarz RT-ZPR40 is listed at $6,160. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Rohde &amp; Schwarz RT-ZPR40 calibration cost

NIST-traceable calibration for the Rohde &amp; Schwarz RT-ZPR40 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →