Rohde & Schwarz RTO2002 Digital Oscilloscope two channels, 600 MHz

The Rohde & Schwarz RTO2002 is a 2-channel digital oscilloscope delivering 600 MHz bandwidth for signal analysis across electronics development, validation, and fault detection. This benchtop instrument combines high sample rates, deep memory, and up to 16-bit vertical resolution to capture and analyze complex signals with minimal noise. The capacitive touchscreen with gesture control and SmartGrid customization enable rapid waveform navigation.

Time-correlated frequency, protocol, and logic analysis functions address multi-domain measurement challenges in a single platform.

Technical Specifications

• Bandwidth: 600 MHz


• Channels: 2 analog channels (expandable to 18 with optional RTO-B1 MSO module)


• Sample Rate: 10 Gsample/s per channel


• Memory Depth: 50 Msample per channel (standard); expandable to 2 Gsample per channel (2 Gsample total memory)


• Single-Channel Mode: Up to 100 Msample per channel


• Vertical Resolution: Up to 16-bit (High Definition mode)


• Waveform Update Rate: Up to 1,000,000 waveforms/s


• Input Impedance: 50 Ω ± 1.5%; 1 MΩ ± 1% at 15 pF


• Input Sensitivity (50 Ω): 1 mV/div to 1 V/div (500 μV to 1 V optional)


• Input Sensitivity (1 MΩ): 1 mV/div to 10 V/div (500 μV to 10 V optional)

Key Features

• Excellent signal fidelity with very low noise acquisition


• Zone trigger function in both time and frequency domains


• External trigger input and output capabilities


• Integrated protocol analysis: I2C, SPI, UART/RS-232, CAN, LIN, MIPI D-PHY, eMMC, Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 100BASE-T1, 1000BASE-T1), DDR3, DDR4, DDR5, USB, FlexRay, I²S, CAN-FD, SENT, MIPI RFFE, 8b10b, MDIO, SpaceWire, PCIe, CXPI


• Logic analysis functions


• DVI and DisplayPort outputs for external monitoring


• Network and remote operation support

Typical Applications Electronics development and testing; sporadic signal fault detection; multi-domain protocol and frequency analysis; DDR memory validation; high-speed serial interface characterization.

Compatibility & Integration Mixed Signal Oscilloscope (MSO) upgrade via RTO-B1 option adds 16 digital channels and can be retrofitted to existing instruments.