JDS Uniphase S182K

The JDS Uniphase S182K is a fusion splicer engineered for high-strength fiber optic splices across dissimilar fiber pairs. Using Profile Alignment System (PAS) core alignment, it accommodates Single Mode, Multimode, Dispersion Shifted, and Erbium-Doped fibers with typical splice losses of 0.03 dB (SM), 0.02 dB (MM), and 0.05 dB (DS). The unit achieves average tensile strength of 300 kpsi with appropriate high-strength accessories and completes SM fiber splices in approximately 20 seconds.

Technical Specifications

Splicing Method: Profile Alignment System (PAS) with core alignment and V-groove fiber positioning

Applicable Fibers: Single Mode (SM), Multimode (MM), Dispersion Shifted (DS), Erbium-Doped Fiber (EDF) - dissimilar fiber pairs

Average Splice Loss: SM 0.03 dB; MM 0.02 dB; DS 0.05 dB

Splice Time: 20 seconds typical for SM fiber

Tensile Strength: 300 kpsi average (Fitel laboratory, with high-strength accessories)

Cleave Length Requirements: 3–5 mm for 250/400 µm coating (high strength); 11 mm or 16 mm for 900 µm coating

Splice Programs: 26 pre-programmed slots plus 6 customizable slots; additional custom programs available upon request

Splice Memory: 400 splice storage capacity

Protection Sleeve Heating: 4 pre-programmed settings (20, 25, 40, 60 mm sleeves) plus 4 customizable slots

Tension Test Capability: 200 g

Monitor: 5-inch color display, 264× magnification

Inspection Functions: Cleave angle, fiber end gap, core eccentricity, offset, tilt, micro-bending, bubbling, thickening, streaking

Environmental Sensors: Air pressure, temperature, humidity

Data Interface: RS232C (D-sub 9 pins male)

Illumination: LED splice chamber lighting

Power Supply: AC 100–120 V or 200–240 V

Operating Range: −10 °C to +50 °C

Storage Range: −40 °C to +60 °C

Dimensions: 180 mm (W) × 260 mm (D) × 160 mm (H)

Weight: 7.5 kg

Languages: GB, D, F, I, E, CZ, NL, DK, RUS, P, S, FIN, JP, Chinese, Korean

Key Features

Rectangular footprint with flat top allows direct workbench integration

Rear-mounted keypad and monitor preserve unobstructed access to splice chamber and protection sleeve oven

High-strength accessory design prevents bare fiber contact with V-grooves, ensuring consistent tensile strength results

Remote control via PC software enables hands-free operation

Real-time monitor display throughout splice cycle

Compatibility & Integration The S182K addresses dissimilar fiber splicing requirements where the S182A model (designed for similar fiber pairs) is insufficient. RS232C communication supports integration into automated inspection and archival systems.