Fujikura FSM-30S Arc Fusion Splicer
Fujikura Fusion Splicers. Wavelength: shifted fiber (CS) at 1550 nm.
- Model
- Fujikura FSM-30S
- Calibration
- Available on request
- Price
- $1,279
- Status
- In stock
- RFQ ref
- FSM-30S
This unit
The Fujikura FSM-30S is an automatic core alignment fusion splicer engineered for single-mode, dispersion-shifted, and multimode optical fibers across telecommunications and field deployment. It employs Profile Alignment System (PAS) technology for direct core monitoring, delivering ultra-low splice loss with accurate loss estimation independent of fiber age or quality. The splicer automatically aligns fiber cores, inspects cleave geometry, and applies eccentricity correction to maintain precision in demanding environments.
Technical Specifications Fiber Splicing
Single-mode fiber (SM) at 1310 nm
Dispersion-shifted fiber (DS) at 1550 nm
Cutoff wavelength-shifted fiber (CS) at 1550 nm
Multimode fiber (MM)
Erbium-doped fiber (ED) Physical & Operating Range
Coated fiber diameter: 250 to 900 µm
Cleaved fiber length: 8 to 16 mm
Operating temperature: -10°C to +50°C
Humidity: 0 to 95% RH
Altitude: Up to 3,500 meters Splice Performance
Single-mode typical loss: 0.02 dB
Multimode typical loss: 0.01 dB
Dispersion-shifted fiber typical loss: 0.05 dB
Return loss: ≥60 dB
Mechanical proof test: 2 N (23 KPSI) standard; 4.6 N (50 KPSI) optional Attenuation Control
Intentional splice loss range: 0.5 dB to 20 dB
Stepped attenuation: 1 dB to 15 dB in 1 dB increments
Key Features
Automatic arc power adjustment with integrated analysis software
Eccentricity correction function (ECF) for core/cladding misalignment
Programmable tube heater with heating profile control
Cleaved fiber end-angle alarm adjustable to 5°
Dust detection function
Internal memory: 100 splice data sets; expandable via PCMCIA card (up to 224,000 results)
CCD camera with high-resolution viewing on X and Y axes
4" or 5" LCD monitor with direct sunlight visibility
RS-232C interface
Physical Specifications
Dimensions: 21 cm W × 18.7 cm D × 17 cm H
Typical Applications Telecommunications network deployment, field fiber termination, and optical system installation where low splice loss and environmental compensation are critical.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1310 nm, 1550 nm |
Fujikura FSM-30S — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fujikura FSM-30S. Calibration covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fujikura FSM-30S faults: electrode wear, V-groove contamination or chipping, motor alignment drift, high arc voltage errors. Common repairs include electrode replacement (typically every 2,000-3,000 arcs), V-groove cleaning or replacement, motor and actuator alignment, and camera/CCD replacement. Fujikura FSM and Sumitomo Type series parts are stocked.
Fujikura FSM-30S price
This Fujikura FSM-30S is listed at $1,279. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fujikura FSM-30S calibration cost
NIST-traceable calibration for the Fujikura FSM-30S is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. Turnaround is 1 to 3 business days after receipt. See full calibration details →
