JDS Uniphase TB9226-1FA1
JDS Uniphase Optical Attenuators. Wavelength: selective filtering across the C-band and extended, Wavelength: dependent component behavior. Grating-based filter.
- Model
- JDS Uniphase TB9226-1FA1
- Calibration
- Available on request
- Price
- $2,600
- Status
- In stock
- RFQ ref
- TB9226-1FA1
This unit
The JDS Uniphase TB9226-1FA1 is a tunable grating filter engineered for precision optical testing in telecommunications and fiber-based component characterization. This device delivers wavelength-selective filtering across the C-band and extended ranges, enabling suppression of spontaneous emission, ASE filtering in EDFAs, and measurement of wavelength-dependent component behavior. Grating-based filtering provides superior wavelength isolation roll-off compared to Fabry-Perot or interference filter alternatives, making it suitable for both laboratory and production test environments.
Technical Specifications
Tuning Range: 1530–1570 nm (C-band); 1460–1575 nm; 1525–1625 nm
Bandwidth (FWHM): 0.22 nm typ.
–3 dB Bandwidth: 0.22 nm (±15%)
–20 dB Bandwidth: 0.6 nm (±15%)
Insertion Loss: < 6.0 dB
Polarization Dependent Loss: 45 dB
Wavelength Resolution: 0.01 nm
Wavelength Repeatability: 0.05 nm
Warm-up Time: 1 hour
Fiber Connectors: FC/APC (single-mode)
Key Features
Front panel keypad control with GPIB (IEEE 488) and RS232 interfaces
Narrow passband enables selective wavelength extraction and spontaneous emission rejection
Fiber-coupled input and output for integration into test systems
CE compliant; meets UL3101-1 and CAN/CSA-C22.2 No. 1010.1
Typical Applications
Spontaneous emission suppression in optical subsystems
ASE filtering in EDFA testing
DFB and tunable laser characterization
WDM and DWDM component verification
production testing of single-mode fiber devices
Compatibility & Integration Designed for single-mode fiber applications. Standard programming via GPIB or RS232 enables integration into automated test platforms and manual control via front-panel interface.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1460 nm to 1575 nm |
JDS Uniphase TB9226-1FA1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase TB9226-1FA1. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase TB9226-1FA1 faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDS Uniphase TB9226-1FA1 price
This JDS Uniphase TB9226-1FA1 is listed at $2,600. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase TB9226-1FA1 calibration cost
NIST-traceable calibration for the JDS Uniphase TB9226-1FA1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
