JDSU TestPoint TS-30 with FC Cards N530-0164
The JDSU TestPoint TS-30 is a versatile testing platform with FC cards N530-0164, designed for comprehensive fiber optic network analysis and troubleshooting. It offers precise measurements and supports various testing functionalities, ensuring optimal network performance.
- Model
- JDSU TS-30/N530-0164
- Calibration
- Available on request
- Price
- $4,930
- Status
- In stock
- RFQ ref
- TS-30/N530-0164
This unit
The JDSU TestPoint TS-30 with FC Card N530-0164 is a modular, slot-based chassis platform engineered for high-speed network testing and fiber optic analysis. The TS-30 accepts hot-swappable test modules and supports rack mounting or portable deployment. The N530-0164 is a 10 Gbps module addressing 10 Gigabit Ethernet LAN/WAN and 10 Gigabit Fibre Channel applications, enabling layer 2–3 traffic generation, capture, and physical layer diagnostics across multiple optical wavelengths.
Technical Specifications
- Module Data Rate: 10 Gbps
- OTN Support: ODU2, OTU2 at 11.049G, 11.095G, 11.270G, 11.317G
- Optical Interfaces: XFP form factor, 1310 nm, 1550 nm, or 850 nm wavelengths
- Traffic Generation: 128 unique streams per module
- Layer 2–3 Protocols: MAC/Stacked VLAN, MPLS, IPv4, IPv6, TCP, UDP
- Physical Layer Capture: 64B/66B PCS and MAC traffic playback
- Mapping Support: GFP-F into OTU2; GFP into STS-192c/VC-4-64c; GFP-F directly into SONET/SDH (STS-192C/VC-4-64c)
- PRBS Modes: Framed and unframed at all supported rates
- Test Methods: BERT for SONET/SDH and 10GbE; SRS (stressed receiver sensitivity) testing
Key Features
- Protocol licensing options for 10G Fibre Channel, GFP, and Cisco HDLC
- Error monitoring: FCS, frame length violations, address mismatches, control mismatches, abort errors, invalid control sequences, IPv4 checksum errors
- Statistical measurement: bandwidth (%, Mbps, frames/s), frame count, octet count, SLARP packet count, IPv4 packet count
- Hot insertion/removal of modules without system downtime
- Handles and bumpers available for portable configurations
Typical Applications
- Production and service verification testing (SVT)
- 10GbE LAN and WAN troubleshooting
- Fibre Channel network analysis
- OTN/SONET/SDH layer validation
- Physical layer compliance and stress testing
Compatibility & Integration The N530-0164 operates within the TS-30 chassis ecosystem, compatible with other slot-based modules. XFP transceiver selection determines operational wavelength and link distance.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1310 nm, 1550 nm, 850 nm |
JDSU TS-30/N530-0164 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDSU TS-30/N530-0164. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDSU TS-30/N530-0164 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
JDSU TS-30/N530-0164 price
This JDSU TS-30/N530-0164 is listed at $4,930. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDSU TS-30/N530-0164 calibration cost
NIST-traceable calibration for the JDSU TS-30/N530-0164 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
