Abaco Systems / VMIC VME-1182A-020000 Digital Input Module
The Abaco Systems / VMIC VME-1182A-020000 is a Digital Input Module.
- Model
- Abaco Systems / VMIC VME-1182A-020000
- Calibration
- Available on request
- Price
- $1,099
- Status
- In stock
- RFQ ref
- VME-1182A-020000
This unit
The Abaco Systems / VMIC VME-1182A-020000 is a 64-channel digital input module for VMEbus systems, delivering optically isolated signal acquisition with change-of-state detection, time tagging, and pulse accumulation. Built in VME 6U form factor, this module integrates into industrial and military I/O processing architectures requiring high-reliability event monitoring and data capture across multiple voltage standards.
Technical Specifications
- Channels: 64 input channels
- Isolation: Optically isolated inputs; 1500 VDC or 1100 VRMS channel-to-channel and channel-to-VME isolation
- Form Factor: VME 6U
- Data Transfer: 8, 16, or 32-bit widths
- I/O Voltage Range: 5 to 60 VDC, 110 VAC, 240 VAC (ordering options support 5 to 250 VDC or 4 to 240 VAC)
- Addressing: A24/A16 jumper-selected address space
Key Features
- Change-of-State Detection: Per-channel rising edge, falling edge, or both; software-selectable with channel masking capability
- Sequence of Events (SOE) Acquisition: Dual-buffer architecture for concurrent processing and loading; time-tagged COS events stored onboard with channel-by-channel monitoring
- Time Tagging: Relative timer values up to 65,535 ms with VME-accessible reset
- Pulse Accumulation: Per-channel event counting up to 65,535 pulses per channel
- Programmable Debounce: Software-controlled per-channel debounce from 1.25 ms to 1.024 s; 2 ms minimum pulse detection width; 4 ms minimum period for simultaneous rising/falling edge detection
- Input Configuration: Contact sensing or voltage sensing options available
Typical Applications Industrial automation, military systems, process control, event logging, and signal monitoring requiring opto-isolated multi-channel digital acquisition with timestamp correlation.
Compatibility & Integration Complies with VMEbus specification ANSI/IEEE STD 1014-1987, IEC 821, and IEC 297. Jumper-selected address modifiers support nonprivileged addressing modes.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 110 VAC, 240 VAC (options: 5 to 250 VDC or 4 to 240 VAC), 5 to 60 VDC |
Abaco Systems / VMIC VME-1182A-020000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VME-1182A-020000. Calibration covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / VMIC VME-1182A-020000 faults: ESD-damaged input protection, failed driver ICs, connector pin damage. Most failures involve ESD-damaged input protection circuitry, failed logic driver ICs, or mechanical connector pin damage. Board-level component replacement is standard practice.
Abaco Systems / VMIC VME-1182A-020000 price
This Abaco Systems / VMIC VME-1182A-020000 is listed at $1,099. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VME-1182A-020000 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VME-1182A-020000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
