Abaco Systems / VMIC VMIVME-2120-122 64-bit High-Voltage Digital Output

The VMIVME-2120-122 is a 64-bit high-voltage digital output VME board from Abaco Systems / VMIC. Designed for industrial applications, it provides reliable and solid digital output capabilities.

Model
Abaco Systems / VMIC VMIVME-2120-122
Calibration
Available on request
Price
$1,599
RFQ ref
VMIVME-2120-122
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Abaco Systems VMIVME-2120-122 is a VMEbus-compatible double Eurocard delivering 64 channels of high-voltage digital output for industrial control and instrumentation systems. Open-collector output drivers source up to 600 mA sink current and support output voltages from 5 VDC to 55 VDC, making this board suitable for relay activation, solenoid control, and incandescent load switching. Eight independently addressable 8-bit registers enable flexible data transfer in 8-, 16-, or 32-bit configurations across jumper-selectable short supervisory or nonprivileged I/O address space.


A dedicated Control Status Register (CSR) with independent address mapping optimizes memory efficiency and software control flow.


Technical Specifications



  • Channels: 64 digital output channels

  • Output Voltage Range: 5 VDC to 55 VDC

  • Output Driver Type: Open-collector, 600 mA sink capability

  • Data Transfer Modes: 8-, 16-, or 32-bit

  • Address Decoder: Separate CSR decoder for hardware control address grouping

  • Address Modifier Codes: Jumper-selectable short supervisory or short nonprivileged I/O (factory set to short supervisory)

  • I/O Connectors: Dual 64-pin DIN 41612 high-reliability connectors

  • Power Consumption: +5 V at 3.786 A maximum

  • Operating Temperature: 0 to 55 °C

  • Storage Temperature: -20 to +85 °C

  • Humidity: 20 to 80 percent relative, noncondensing

  • Cooling: Forced air convection


Key Features



  • Built-in-test (BIT) logic supports offline and real-time fault detection

  • Test Mode Bit enables offline diagnostics with all outputs OFF

  • Fail LED indicates power-up status, extinguished under software control

  • Output clamp diodes prevent inductive flyback damage

  • Optional automatic surge current shutdown protection

  • Optional thermal shutdown protection for incandescent load driving

  • Contiguous memory mapping conserves I/O and CSR address space


Compatibility & Integration Fully VMEbus specification compatible with standard short supervisory and nonprivileged I/O access modes. Integrates into VMEbus crates with forced-air cooling infrastructure.

Specifications

ParameterValue
Voltage / Current Range'+5 V @ 3.786 A (maximum), 5 VDC to 55 VDC output

Abaco Systems / VMIC VMIVME-2120-122 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-2120-122. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Abaco Systems / VMIC VMIVME-2120-122 price

This Abaco Systems / VMIC VMIVME-2120-122 is listed at $1,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Abaco Systems / VMIC VMIVME-2120-122 calibration cost

NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-2120-122 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →