Abaco Systems / VMIC VMIVME-2131-110 64-Bit Current Source / Sink Driver

The Abaco Systems / VMIC VMIVME-2131-110 is a 64-channel current source/sink driver module for VMEbus systems. It delivers continuous output up to 500 mA per channel with peak currents reaching ±3.5 A (100 ms, 10% duty cycle) across an 8 to 35 VDC output range. Each channel is jumper-selectable for source/High-Z or source/sink operation, with integrated transient and thermal shutdown protection.

The module features eight independently addressable ports supporting 8-, 16-, or 32-bit VMEbus transfers, making it ideal for high-current switching and load driving in industrial test and control applications.

Technical Specifications

• 64 channels, jumper-selectable source/High-Z or source/sink


• Continuous current: 500 mA (fan cooled)


• Peak output current: ±3.5 A (100 ms, 10% duty cycle)


• Output voltage range: 8 to 35 VDC


• Output saturation: 2 V max at 2 A


• Output leakage: 500 µA across 0 to 33 V


• Breakdown voltage: 35 V minimum VMEbus Interface


• Eight ports on 8-, 16-, or 32-bit boundaries


• Data transfers: 8, 16, or 32-bit


• Address modifiers: jumper-selectable short supervisory or short nonprivileged I/O


• Independently selectable Control and Status Register address


• Factory configured for short supervisory I/O access Electrical & Thermal


• External power: 8.0 to 33 VDC (front panel connector)


• +5V consumption: 5.1 A maximum


• No-load supply current: 35 mA per driver


• Forced convection cooling


• Operating temperature: 0 to 55 °C


• Storage temperature: -20 to 85 °C

Key Features

• Integrated Built-in-Test logic for channel verification and fault isolation under software control


• Front panel Fail LED for diagnostic status indication


• Dual 64-pin DIN 41612 high-reliability output connectors


• Transient protection and thermal shutdown on all channels


• Double Eurocard form factor for standard VME rack integration

Typical Applications High-current switching, relay driver circuits, solenoid control, load simulation, and industrial test systems requiring distributed current sourcing/sinking with embedded diagnostics.

Compatibility & Integration Software compatible with VMIVME-2120. Supports VMEbus specification-compliant systems with standard address modifier selection.