Abaco Systems / VMIC VMIVME-5588-110 High-Speed Fiber-Optic 1.2 Gbaud Reflective Memory with Interrupts
Abaco Systems / VMIC VME Modules. Model: VMIVME-5588-110.
- Model
- Abaco Systems / VMIC VMIVME-5588-110
- Calibration
- Available on request
- Price
- $3,599
- RFQ ref
- VMIVME-5588-110
This unit
The Abaco Systems / VMIC VMIVME-5588-110 is a high-speed fiber-optic reflective memory board for VMEbus systems delivering 1.2 Gbaud serial performance in real-time data sharing applications. The two-slot 6U board supports up to 256 independent nodes in a daisy-chained, fiber-optic ring topology, with data transfer rates of 29.5 Mbyte/s (standard) or 14.8 Mbyte/s (redundant transfer mode). On-board SRAM/SDRAM ranges from 256 Kbyte to 16 Mbyte with configurable addressing via A24:A32:D32:D16:D8 memory access.
Technical Specifications
- Serial Data Rate: 1.2 Gbaud
- Throughput: Up to 29.5 Mbyte/s without redundancy; 14.8 Mbyte/s with redundant transfer
- Maximum Nodes: 256 independent systems
- On-board Memory: Configurable 256 Kbyte to 16 Mbyte (SRAM/SDRAM)
- Node Addressing: Unique ID 0–255 (jumper-selectable)
- Operating Temperature: 0 to 65 °C with forced air cooling
- Storage Temperature: -40 to 85 °C
- Relative Humidity: 20 to 80% non-condensing
- MTBF: 88,005 hours at 217 °F
Key Features
- Reflective Memory Architecture: Data written to one node automatically broadcasts to all network nodes; software-transparent operation with zero processor overhead.
- Interrupt Support: Three user-definable interrupt levels. Any node can generate interrupts to individual nodes or multicast to all nodes. Interrupts follow data transmission to ensure reception before acknowledgment.
- Fiber-Optic Options: Multimode fiber (up to 1,000 ft between nodes), single-mode fiber with SC connectors (up to 10 km), or twinax cable with 9-pin D-type connectors (up to 30 m).
- FIFO Buffering: Transmit and Receive FIFOs optimize CPU and bus performance during peak data rates.
- Error Suppression: Redundant transmission mode available for error detection.
Typical Applications High-speed distributed real-time systems requiring deterministic, low-latency data sharing across multiple processors in industrial, aerospace, and defense environments.
Compatibility & Integration VMEbus-compatible, two-slot 6U form factor. Software-compatible with VMIVME-5578.
Abaco Systems / VMIC VMIVME-5588-110 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / VMIC VMIVME-5588-110. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Abaco Systems / VMIC VMIVME-5588-110 price
This Abaco Systems / VMIC VMIVME-5588-110 is listed at $3,599. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / VMIC VMIVME-5588-110 calibration cost
NIST-traceable calibration for the Abaco Systems / VMIC VMIVME-5588-110 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →