Fluke 124B Industrial ScopeMeter Hand-Held Oscilloscope, 40 MHz
The Fluke 124B Industrial ScopeMeter is a rugged, hand-held oscilloscope designed for industrial electrical and electro-mechanical equipment troubleshooting and maintenance applications. It features a 40 MHz bandwidth, dual-input channels, and a built-in multimeter for comprehensive diagnostics. The 124B offers waveform analysis, automatic measurements, and recording capabilities, making it an essential tool for technicians and engineers in the field.
- Model
- Fluke 124B
- Calibration
- Available on request
- Price
- $2,679
- Status
- In stock
- RFQ ref
- 124B
This unit
The Fluke 124B Industrial ScopeMeter is a handheld dual-channel oscilloscope integrating digital multimeter and high-speed recorder functions into a single field-deployable instrument. Engineered for industrial troubleshooting and maintenance, it delivers real-time waveform capture, power analysis, and extended data logging to accelerate diagnostics on electro-mechanical systems while maintaining continuous operation.
Technical Specifications Oscilloscope:
Bandwidth: 40 MHz
Channels: 2 analog
Frequency response (DC coupled, direct): DC to 40 MHz (-3 dB)
Frequency response (with VP41 10:1 probe): DC to 40 MHz (-3 dB)
Frequency response (with STL120-IV 1:1 shielded test leads): DC to 12.5 MHz (-3 dB) / DC to 20 MHz (-6 dB)
Sample rate: 25 MS/s
Memory depth: 400 Mpts
Triggering: Connect-and-View™ auto-adjust, IntellaSet™ signal analysis, manual override
Waveform analysis: Scope cursor mode Digital Multimeter:
Display: 5000-count true-RMS
Voltage, current (with clamp), resistance, diode, continuity, capacitance
RPM: 0–50 kRPM, ±(0.5% + 2 counts)
Duty cycle: 2% to 98%, 15 Hz to 30 MHz (1 Hz minimum)
Pulse width: 15 Hz to 30 MHz
Power measurements: W, VA, VAR, PF, DPF, Hz
AC+DC RMS on dual inputs for single-phase or 3-phase balanced systems
3-phase power calculations: frequency, phase angle, kW, VA/var, PF, DPF Recorder:
Dual-input waveform and meter recorder for extended trending
Event detect captures intermittent signals on repetitive waveforms up to 4 kHz
Recording duration: up to 14 days
Storage: internal memory or optional SD card
Display: chart recorder (min/max over time) or waveform recorder (all samples) General:
Safety: CAT IV 600 V, 750 V maximum
Form factor: Handheld
Key Features
Connect-and-View™ trigger automatically optimizes amplitude, timebase, and trigger level
IntellaSet™ technology analyzes signals and displays critical numerical readouts automatically
Recorder event detection logs deviations from user-set thresholds
Dual-input simultaneous measurement capability
Typical Applications
Industrial motor and drive diagnostics
Power quality and phase angle measurement
Machine condition monitoring via extended-duration logging
Intermittent fault capture on rotating equipment
Compatibility & Integration
Compatible with VP41 10:1 probes (full 40 MHz bandwidth)
Compatible with STL120-IV 1:1 shielded test leads (12.5 MHz at -3 dB)
Optional SD card support for extended data archiving
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 40 MHz | Voltage / Current Range: 600 V CAT IV, 750 V maximum |
Fluke 124B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 124B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Fluke 124B price
This Fluke 124B is listed at $2,679. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 124B calibration cost
NIST-traceable calibration for the Fluke 124B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
