Keithley 2701 Ethernet Multimeter System
Keithley Data Acquisition Systems (DAQ). Voltage: (1 + 5)/°C, Channels: Up to 200 differential (2-pole configuration).
- Model
- Keithley 2701
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- 2701
This unit
The Keithley 2701 Ethernet Multimeter System integrates digital multimeter, signal routing, and data logging functions into a single half-rack instrument. It delivers true 6½-digit resolution across voltage, current, resistance, and temperature measurements while simultaneously managing up to 200 differential input channels and 96 matrix crosspoints. The system supports scan rates to 500 channels/second or 3500 readings/second on a single channel, with 450,000-reading battery-backed memory for extended data capture. Ethernet connectivity via 10/100BaseTX enables remote operation and configuration through a built-in diagnostic web interface.
Technical Specifications Measurement Resolution & Accuracy
True 6½-digit (22-bit) resolution
DC Voltage (100 mV range): 0.1 µV resolution; 15 ppm of reading + 30 ppm of range (24-hour accuracy)
Resistance (10 MΩ range): 15 ppm of reading + 6 ppm of range (24-hour accuracy); 100 µΩ resolution
Temperature coefficient for DC voltage: (1 + 5)/°C; resistance: (1 + 1)/°C Data Acquisition
Maximum scanning rate: 500 channels/second
Single-channel rate: 3500 readings/second
Internal trigger rate (max): 2800/s
External trigger rate (max): 2000/s
Memory buffer: 450,000 readings (battery-backed) System Architecture
Input channels: Up to 200 differential (2-pole configuration)
Matrix crosspoints: 96 maximum
Plug-in slots: 2 for switch/control modules
DC voltage protection: 1000 V Power Requirements
Selectable input: 100 V / 120 V / 220 V / 240 V AC
Line frequency: 45–66 Hz, 360–400 Hz
Power rating: 80 VA max at 50/60/400 Hz Physical
Half-rack width, 2U height
Key Features
Measurement functions: DCV, ACV, DCI, ACI, 2-wire/4-wire resistance with offset compensation, temperature (thermocouple/RTD/thermistor), frequency/period, continuity, event counting, digital I/O
Ethernet: 10/100 Mbits/sec; RJ45; TCP/IP socket interface; 100 m maximum hardwired distance
Secondary interfaces: RS-232 (9-pin D-Sub), GPIB (configuration varies), digital I/O (9-pin D-Sub)
Rack-mount or benchtop configuration with front-panel probe access
Typical Applications Automated test equipment (ATE), research and development, industrial monitoring, and applications requiring simultaneous multi-channel measurement and signal routing.
Compatibility & Integration Ethernet control supports remote access and instrument diagnostics. GPIB and RS-232 interfaces provide legacy system integration. Plug-in module architecture enables customized switch configurations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 3 Hz to 1 MHz | Voltage / Current Range: DC Voltage: 200 mV to 1000 V |
| AC Voltage | 200 mV to 750 V |
| DC Current | 200 µA to 10 A |
| AC Current | 200 mA to 10 A |
Keithley 2701 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keithley 2701. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keithley 2701 price
This Keithley 2701 is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keithley 2701 calibration cost
NIST-traceable calibration for the Keithley 2701 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
