INO FAF-50 Benchtop Erbium-Doped Fiber Amplifier
INO Optical Amplifiers. Wavelength: 1550 nm band.
- Model
- INO FAF-50
- Calibration
- Available on request
- Price
- $1,555
- Status
- In stock
- RFQ ref
- FAF-50
This unit
The INO FAF-50 is a benchtop Erbium-Doped Fiber Amplifier that boosts optical signal power in the 1550 nm band. It delivers adjustable gain and output power, making it suitable for telecommunications, research, optical sensing, and instrumentation applications. The compact design and user-friendly interface enable rapid integration into laboratory and system environments without requiring extensive reconfiguration.
Technical Specifications
Operating Wavelength: 1550 nm band Amplifier Type: Erbium-Doped Fiber Amplifier (EDFA) Form Factor: Benchtop Fiber Compatibility: Standard single-mode fiber at 1550 nmKey Features
- Adjustable gain and output power for application-specific optimization
- Compact benchtop form factor designed for laboratory environments
- User-friendly interface with front-panel controls
- Direct integration into existing optical systems
Typical Applications
- Telecommunications: Signal amplification in fiber optic networks
- Research and Development: Optical and photonics laboratory experiments
- Optical Sensing: Enhanced signal detection in sensor systems
- Optical Instrumentation: Power amplification in complex optical setups
Compatibility & Integration The FAF-50 operates with standard single-mode fibers in the 1550 nm spectrum and integrates into established optical architectures. Its adjustable parameters support diverse system requirements without requiring external modifications or specialized mounting hardware.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1550 nm |
INO FAF-50 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the INO FAF-50. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common INO FAF-50 faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
INO FAF-50 price
This INO FAF-50 is listed at $1,555. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
INO FAF-50 calibration cost
NIST-traceable calibration for the INO FAF-50 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
