HP / Agilent 54505B 500 MSa/s DIGITIZING OSCILLOSCOPE
HP / Agilent Digital Oscilloscopes. Bandwidth: 300 MHz, Sample Rate: 500 MSa/s.
- Model
- HP / Agilent 54505B
- Calibration
- Available on request
- Price
- $1,033
- Status
- In stock
- RFQ ref
- 54505B
This unit
The HP/Agilent 54505B is a 300 MHz, 2-channel digitizing oscilloscope delivering 500 MSa/s maximum sample rate for accurate signal capture and analysis across electronic testing, debugging, and design validation tasks. Part of the HP 54500 Series, this instrument combines advanced triggering capabilities with comprehensive measurement analysis in a feature-rich platform.
Technical Specifications Digitizer Performance
Bandwidth: 300 MHz
Channels: 2
Maximum Sample Rate: 500 MSa/s
Record Length: Up to 8K points Triggering Capability Advanced logic triggering enables capture of complex signal events through edge, pattern, state, and delay-based trigger modes. Trigger sensitivity reaches 0.35 div or 3.5 mV from DC to 100 MHz on internal channels, with external trigger capability to 250 MHz. Measurement & Analysis Seventeen automatic measurements with user-definable thresholds provide flexible signal characterization. Measurement statistics continuously display minimum, maximum, and mean values. Fast Fourier Transform (FFT) enables frequency-domain analysis. Automask generator and waveform compare mode support mask-based testing of incoming signals. Sequential single-shot capture enables multiple event acquisition without dead time.
Key Features
Nonvolatile setup and waveform memory
Full HP-IB programmability for automated test integration
Pushbutton hard copy output
Autoscale function for rapid measurement setup
Pattern and state triggering for bus and protocol analysis
Trigger delay capability for post-event capture
Customizable measurement thresholds
Typical Applications Timing violation detection, transient bus phenomena capture, signal integrity analysis, frequency characterization, design validation, and automated test sequences requiring advanced trigger conditions.
Compatibility & Integration HP-IB interface enables programmable control and integration into automated test systems. Nonvolatile memory preserves instrument configuration and acquired waveforms across power cycles.
HP / Agilent 54505B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 54505B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 54505B price
This HP / Agilent 54505B is listed at $1,033. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 54505B calibration cost
NIST-traceable calibration for the HP / Agilent 54505B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →