HP / Agilent 54615B 2 Channel Oscilloscope, 1 GSa/s 500 MHz

The HP/Agilent 54615B is a 2-channel digital oscilloscope delivering 500 MHz bandwidth and 1 GSa/s simultaneous sampling per channel for high-speed analog and digital circuit characterization. This instrument combines intuitive front-panel controls with advanced digital processing capabilities, enabling precise waveform capture and analysis in laboratory and field troubleshooting environments.

Technical Specifications

Bandwidth: 500 MHz (single-shot: 250 MHz)

Sample Rate: 1 GSa/s per channel simultaneous

Peak Detect: 1 ns

Sweep Speed Range: 1 ns/div to 5 s/div

Vertical Sensitivity: 2 mV/div to 5 V/div

Dynamic Range: ±12 div from center screen

Horizontal Accuracy: ±0.005% or 0.01%

Input Coupling: DC, AC, Ground

Input Impedance: Selectable 50 Ω or 1 MΩ

Input Capacitance: Approximately 9 pF

Maximum Input Voltage: 250 V (dc + peak ac) or 5 Vrms in 50 Ω mode

CMRR: Approximately 20 dB at 50 MHz

Bandwidth Limit: Approximately 30 MHz

Trigger Sensitivity: 0.35 div or 3.5 mV (DC to 25 MHz)

Display: Monochrome

Physical: Compact, under 15 pounds

Key Features

External trigger input with viewable trigger signal

Autoscale function automatically optimizes voltage, time, and trigger setup

Negative time acquisition captures pre-trigger events

Cursor-based and automatic measurements accelerate analysis

Probe compensation and automatic attenuation factor detection for compatible probes

Waveform storage via button control

Undo autoscale capability to revert prior configurations

Typical Applications General-purpose analog and digital circuit testing; high-speed signal characterization; laboratory troubleshooting; waveform visualization and timing analysis.

Compatibility & Integration Supports optional measurement/storage modules including FFT analysis, test automation via HPIB, and automatic measurement capabilities. BenchLink software enables PC integration and data transfer under Windows. External trigger input accommodates remote control and synchronization. Compatible with various Agilent active probes including the 1141A series.