Fujikura 62S SM MM Core Alignment Fiber Fusion Splicer
The Fujikura 62S is a core alignment fusion splicer designed for splicing single-mode and multimode optical fibers. It features advanced image processing for precise core alignment, resulting in low splice loss and high-quality splices. The splicer is equipped with a user-friendly interface and automated functions for efficient operation. It is a reliable tool for field and laboratory use.
- Model
- Fujikura 62S
- Calibration
- Available on request
- Price
- $8,579
- Status
- In stock
- RFQ ref
- 62S
This unit
The Fujikura 62S is a core alignment fusion splicer for single-mode and multimode optical fibers. It employs Profile Alignment System (PAS) technology with dual-axis CMOS camera observation to deliver automatic core-to-core alignment, consistent low splice loss, and accurate loss estimation across fiber types. Field and laboratory deployments benefit from real-time arc calibration, programmable splice and heating modes, and heritage-proven electrode performance.
Technical Specifications Fiber Compatibility
Single Mode: ITU-T G.652, G.657
Multimode: ITU-T G.651
Dispersion Shifted: ITU-T G.653
Non-Zero Dispersion Shifted: ITU-T G.655
Cladding diameter: 80–150 µm
Sheath diameter: 100–3000 µm Splice Loss Performance
Single Mode: 0.02 dB typical
Multimode: 0.01 dB typical
Dispersion Shifted: 0.04 dB typical
Non-Zero Dispersion Shifted: 0.04 dB typical
Return Loss: >>60 dB Alignment & Observation
Dual-axis CMOS camera system at 320X magnification (400X post-splice)
Core-to-core alignment for SM/DS/NZDS fibers
Cladding-to-cladding alignment for MM fiber
Real-time arc calibration with cladding illumination feedback
4.73" color LCD display Splice Modes & Timing
100 preset and user-programmable splice modes
Ultra Fast mode: 6 sec
SM Fast mode: 7 sec
SM Auto mode: 10 sec
Tube heating: 15–25 sec depending on sleeve type and coating diameter Data Storage & Electrodes
Stores last 10,000–15,000 splices
Electrode life: 3,000 arc-discharges per pair; 5,000 splices
Spare electrodes: ELCT2-20A Cleave & Tension
Cleave length: 5–16 mm with sheath clamp
Tension test load: 1.96–2.25 N (200–230 gf)
Key Features
Attenuation splice function: 0.1–15 dB in 0.1 dB steps for in-line fixed attenuators
Splice loss estimation accounting for core deformations and axis offsets
Manual and automatic arc power calibration
30 preset and user-programmable heating modes
AC100–240V, 50–60 Hz or DC10–12V operation
Typical Applications Network installation and maintenance, cable plant splicing, lab characterization, and field repairs where low-loss, high-return-loss joints are required across heterogeneous fiber types.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | AC100-240V 50-60Hz, DC10-12V |
Fujikura 62S — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fujikura 62S. Calibration covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fujikura 62S faults: electrode wear, V-groove contamination or chipping, motor alignment drift, high arc voltage errors. Common repairs include electrode replacement (typically every 2,000-3,000 arcs), V-groove cleaning or replacement, motor and actuator alignment, and camera/CCD replacement. Fujikura FSM and Sumitomo Type series parts are stocked.
Fujikura 62S price
This Fujikura 62S is listed at $8,579. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fujikura 62S calibration cost
NIST-traceable calibration for the Fujikura 62S is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers arc calibration (arc power and duration), V-groove alignment verification, cleave angle detection accuracy, splice loss estimation accuracy, and heating oven temperature calibration. Turnaround is 1 to 3 business days after receipt. See full calibration details →
