Anritsu 68237B Synthesized Signal Generator, 2 – 20 GHz
Anritsu 68237B,A precision signal generator covering 2 to 20 GHz, suitable for mid-to-high frequency testing. Provides stable output with low phase noise and supports analog modulation. Ideal for validating RF components, subsystems, and communication equipment in development and verification stages.
- Model
- Anritsu 68237B
- Calibration
- Available on request
- Price
- $15,670
- Status
- In stock
- RFQ ref
- 68237B
This unit
The Anritsu 68237B is a synthesized signal generator delivering precision RF and microwave signals across 2–20 GHz for demanding component, subsystem, and communication equipment testing. Its phase-locked architecture generates stable outputs with ultra-low SSB phase noise at –100 dBc (10 kHz offset, 10 GHz), supporting continuous wave, step sweep, manual sweep, and analog sweep modes. The instrument provides internal AM, FM, phase, and pulse modulation alongside external modulation inputs.
Up to 20 independent, pre-settable markers (F0–F9, M0–M9) enable precise frequency identification during analog and step sweeps. Output power spans –125 dBm to +17 dBm maximum, leveled in 0.01 dB steps to –120 dBm. Harmonic distortion remains below –60 dBc across 2–20 GHz, with non-harmonic distortion below –60 dBc from >2 GHz to ≤67 GHz.
Frequency resolution reaches 0.1 Hz with Option 11; step size ranges 1 kHz to full span with adjustable dwell times from 1 ms to 99 seconds. Switching speed is typically <15 ms plus 1 ms/GHz step size, or <40 ms (whichever is less); steps <100 MHz switch in <5 ms. The instrument ships in rackmount form factor and supports SCPI programmability via Option 19 (IEEE 488.2–1987).
Technical Specifications
- Frequency range: 2–20 GHz
- Output power: –125 dBm to +17 dBm maximum
- SSB phase noise: –100 dBc at 10 kHz offset (10 GHz)
- Frequency resolution: 0.1 Hz (Option 11); standard resolution 100.0 mHz
- Step size: 1 kHz to full range (0.1 Hz with Option 11)
- Dwell time per step: 1 ms to 99 seconds
- Frequency switching time: <15 ms + 1 ms/GHz; <40 ms maximum; <5 ms for steps <100 MHz
- Output leveling: ±0.01 dB steps, down to –120 dBm
- Harmonic distortion: <–60 dBc (2–20 GHz)
- Non-harmonic distortion: 2 GHz to ≤67 GHz)
Key Features
- Continuous wave, step sweep, manual sweep, and analog sweep capability
- Alternate sweep mode between two ranges with independent power levels
- Internal modulation: AM, FM, phase modulation, pulse modulation
- External modulation input support
- Twenty independent markers with video marker output
- Low spurious signal performance
- SCPI programmability via Option 19
- Rackmount configuration
Typical Applications
- RF component development and verification
- Microwave subsystem testing
- Communication equipment characterization
- Precision frequency sweep and marker-based measurement protocols
Compatibility & Integration SCPI command control is available through Option 19, enabling remote instrument operation and integration into automated test systems compliant with IEEE 488.2–1987 standards.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2–20 GHz | Power Range (dBm): –125 dBm to +17 dBm |
Anritsu 68237B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 68237B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 68237B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 68237B price
This Anritsu 68237B is listed at $15,670. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 68237B calibration cost
NIST-traceable calibration for the Anritsu 68237B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
