Anritsu 69355A Synthesized Sweep/Signal Generator, 0.5 – 26.5 GHz
Anritsu 69355A Synthesized Sweep/Signal Generator,Offers frequency generation from 0.5 to 26.5 GHz with excellent phase noise and power level accuracy. Ideal for aerospace and satellite testing applications requiring consistent signal performance across wide frequency bands.
- Model
- Anritsu 69355A
- Calibration
- Available on request
- Price
- $8,679
- Status
- In stock
- RFQ ref
- 69355A
This unit
The Anritsu 69355A is a synthesized sweep/signal generator delivering precise frequency generation from 0.5 GHz to 26.5 GHz. Built for aerospace, satellite, and demanding RF/microwave applications, it combines exceptional phase noise performance with stringent power level accuracy. The instrument supports rapid frequency hopping, complex sweep modes, and list-based test sequences, making it ideal for receiver testing, susceptibility studies, and systems requiring high spectral purity and repeatable measurements.
Technical Specifications
Frequency & Output- Frequency range: 0.5 GHz to 26.5 GHz
- Frequency resolution: 1 Hz steps (typical)
- Output power: -120 dBm to +13 dBm (nominal)
- Power accuracy: ±0.5 dB or better under controlled conditions
- Output impedance: 50 Ohms
- RF connector: N-type female Signal Quality
- Phase noise: Superior performance across modulation offsets (10 kHz, 100 kHz, 1 MHz specified in datasheets)
- Harmonic distortion: Low
- Non-harmonic spurious signals: Minimized
- Power flatness: Excellent across frequency bands
Key Features
- Synthesized architecture ensures stable, precise output
- Frequency sweep, amplitude sweep, and step sweep modes with user-definable parameters
- List mode operation for pre-programmed test sequences
- Rapid tuning speed optimized for efficient test execution
- 1 Hz frequency resolution enables fine-grained control
Typical Applications
- Aerospace and satellite system testing
- Receiver sensitivity and selectivity characterization
- EMI/susceptibility testing
- RF and microwave component validation
- Spectral purity-critical applications
Compatibility & Integration
- GPIB (IEEE 488.2) control interface
- SCPI command compliance for automated test sequences
- Integration into larger automated test systems
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 26.5 GHz | Power Range (dBm): '-120 dBm to +13 dBm |
Anritsu 69355A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69355A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69355A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69355A price
This Anritsu 69355A is listed at $8,679. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69355A calibration cost
NIST-traceable calibration for the Anritsu 69355A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
