Anritsu 68295B Synthesized Signal Generator
Anritsu 68295B,A high-performance signal generator providing precision outputs up to 65 GHz. Designed for demanding RF and microwave testing, it features excellent spectral purity, fast frequency switching, and broad modulation capabilities. Ideal for R&D and production environments requiring high-frequency signal accuracy and flexibility.
- Model
- Anritsu 68295B
- Calibration
- Available on request
- Price
- $6,500
- Status
- In stock
- RFQ ref
- 68295B
This unit
The Anritsu 68295B Synthesized Signal Generator delivers precision RF and microwave signal generation across 10 MHz to 65 GHz, engineered for R&D and production test environments demanding high accuracy and spectral purity. The instrument provides output power from -10 dBm to +30 dBm with phase noise typically -136 dBc/Hz and low spurious signal performance.
Technical Specifications
Frequency Range: 10 MHz to 65 GHz Output Power: -10 dBm to +30 dBm (up to +17 dBm available) Phase Noise: Typically -136 dBc/Hz Frequency Switching Time: <15 ms + 1 ms/GHz step size or <40 ms (typical maximum) Sweep Step Size: 1 kHz to full frequency range (0.1 Hz with Option 11) Dwell Time: 1 ms to 99 seconds per step Step Sweep: 1 to 10,000 steps with phase-locked operation across entire sweep width Programmable Frequency Agility: Up to 1,000 non-sequential frequencies via GPIB controlKey Features
- AM and FM modulation via external signals or internal arbitrary waveform generators
- Seven internal modulating waveforms including Gaussian noise and user-defined arbitrary waveforms
- Pulse modulation with doublet, triplet, or quadruplet pulse support for RADAR blind spot testing
- Simultaneous synchronized modulations for complex signal scenarios
- Analog sweep, step sweep, and manual sweep modes
- Alternate sweep mode between two independent sweep ranges with selectable power levels
- Up to 20 pre-settable frequency markers (F0–F9, M0–M9) with CRT display visibility
- Marker frequency accuracy matches sweep frequency accuracy
- GPIB interface for remote programming and control
Typical Applications RF component characterization, microwave receiver testing, radar system development, and production validation in environments requiring frequency agility and low phase noise performance.
Compatibility & Integration GPIB-equipped for instrument control and automated test sequences.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 65 GHz | Power Range (dBm): '-10 dBm to +30 dBm |
Anritsu 68295B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 68295B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 68295B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 68295B price
This Anritsu 68295B is listed at $6,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 68295B calibration cost
NIST-traceable calibration for the Anritsu 68295B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
