Anritsu 69155A Synthesized Sweep Generator, 0.01 – 65.0 GHz
Anritsu 69155A,"Wideband sweep generator covering 0.01 to 65 GHz. Suitable for broadband microwave and communication system testing with excellent phase noise performance."
- Model
- Anritsu 69155A
- Calibration
- Available on request
- Price
- $37,570
- Status
- In stock
- RFQ ref
- 69155A
This unit
The Anritsu 69155A is a synthesized sweep generator delivering precise signal generation across 0.01 GHz to 65.0 GHz. Built for broadband microwave and communication system testing, it combines excellent phase noise performance with flexible sweep control - analog, step, and manual modes - making it suitable for laboratory and automated test equipment integration. The instrument supports programmable frequency agility with storage and addressing of up to 1000 non-sequential frequencies for phase-locked step sweeps under GPIB control.
Technical Specifications
- Frequency Range: 0.01 GHz to 65.0 GHz
- Output Impedance: 50 Ω
- Phase Noise: Excellent performance across the band
- Power Resolution: 0.01 dB (referenced specification)
Key Features
- Synthesized sweep architecture for frequency stability and agility
- Multiple sweep modes: analog, step, and manual
- Programmable frequency memory: 1000 non-sequential frequencies
- Phase-locked step sweep capability via GPIB control
- GPIB (IEEE-488) interface for remote automation and system integration
- SCPI and native command support for flexible instrument control
- 16-signal-line GPIB bus architecture for multi-device test systems
Typical Applications
- Broadband microwave system characterization
- Communication subsystem testing and validation
- Component and subsystem RF performance measurement
- Laboratory signal source applications requiring wide frequency coverage
Compatibility & Integration The 69155A integrates into automated test equipment (ATE) systems and laboratory setups via standard GPIB interfaces. SCPI command set enables remote control and data logging. Native command support provides series-specific functionality. Standard 50 Ω RF connectors accommodate typical microwave test configurations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 65.0 GHz |
Anritsu 69155A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69155A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69155A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69155A price
This Anritsu 69155A is listed at $37,570. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69155A calibration cost
NIST-traceable calibration for the Anritsu 69155A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
