Anritsu 69197A Synthesized Sweep Generator, 0.01 – 65.0 GHz
Anritsu 69197A Synthesized Sweep Generator,Spans from 0.01 to 65 GHz, integrating sweep functionality for high-frequency analysis. Ideal for broadband component verification and radar simulation.
- Model
- Anritsu 69197A
- Calibration
- Available on request
- Price
- $24,570
- Status
- In stock
- RFQ ref
- 69197A
This unit
The Anritsu 69197A Synthesized Sweep Generator operates from 0.01 GHz to 65.0 GHz, delivering precise signal generation across an extended microwave and millimeter-wave spectrum. This instrument integrates multiple sweep modes - analog, step, manual, alternate range, and list modes - enabling dynamic frequency analysis for broadband component characterization, radar simulation, and advanced RF/microwave testing. Output power spans from -125 dBm to +17 dBm with 0.01 dB resolution and guaranteed leveled power to +17 dBm across 0–20 GHz.
Phase noise performance reaches -100 dBc SSB at 10 kHz offset from 10 GHz, supporting demanding measurement applications requiring low-noise signal sources.
Technical Specifications
Frequency Range:- 0.01 GHz to 65.0 GHz Output Power:
- Maximum: +17 dBm (guaranteed leveled to 20 GHz)
- Minimum: -125 dBm
- Resolution: 0.01 dB steps to -120 dBm Phase Noise:
- -100 dBc SSB at 10 kHz offset from 10 GHz Frequency Resolution:
- Standard: 100.0 mHz
- Optional: 0.1 Hz Switching Time:
- Typical: less than 40 ms maximum
- Formula: less than 15 ms + 1 ms/GHz step size
Key Features Sweep Modes:
- Analog sweep across full frequency range
- Step sweep: 1–10,000 steps with variable dwell time (1 ms to 99 s) and step size (1 kHz to full range)
- Manual sweep with phase-locked discrete frequency adjustment
- Alternate sweep between two independent ranges with separate power levels
- List sweep: up to 1,000 non-sequential frequencies Modulation:
- Internal modes: AM, FM, Pulse, Phase, Scan
- Seven modulating waveforms including Gaussian noise
- User-downloadable complex modulation Additional:
- User level flatness correction
- Master/slave operation for multi-unit systems
- Self-test and secure mode
- GPIB (IEEE 488) interface
- 13.3 cm package height
Typical Applications Broadband component verification, radar system simulation, RF and microwave device characterization across extended frequency ranges.
Compatibility & Integration GPIB remote programming and control; supports networked multi-generator configurations via master/slave operation.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 65.0 GHz | Power Range (dBm): '-125 dBm to +17 dBm |
Anritsu 69197A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69197A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69197A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69197A price
This Anritsu 69197A is listed at $24,570. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69197A calibration cost
NIST-traceable calibration for the Anritsu 69197A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
