Agilent/Keysight 70910A – RF Section Module
The Agilent/Keysight 70910A is a spectrum analyzer interface module designed for use with Agilent/Keysight 70000 series modular measurement systems. It provides the necessary interface and control functions for spectrum analysis measurements within these systems.
- Model
- HP 70910A
- Calibration
- Available on request
- Price
- $2,649
- RFQ ref
- 70910A
This unit
The Agilent/Keysight 70910A is a wide-bandwidth RF section module engineered for integration into Agilent/Keysight 70000 series modular spectrum analyzer systems. This module is the RF front-end interface, combining diode-pair mixing architecture with a built-in microwave preamplifier to deliver low conversion loss and enhanced sensitivity across its operating range.
Technical Specifications
- Frequency range: 100 Hz to 26.5 GHz
- Mixing architecture: Diode-pair mixing for reduced conversion loss
- Preamplifier: Built-in microwave path preamplifier for improved sensitivity
- YIG-tuned filter (YTF) minimum bandwidth: >36 MHz
- Low-band path minimum bandwidth: >45 MHz
- Local oscillator: Switched LO routed to front panel for external mixer connection
- Module footprint: Two adjacent 1/8 module slots (HP 70000 Series mainframe)
- Physical dimensions: 12 × 10 × 8 inches (approximate)
- Weight: 10 lbs (approximate)
Key Features
- Switchable YTF bypass path enables sensitive measurements when external signal interference is minimal
- External mixer support with dedicated switching and signal routing for 11974 series preselected mixers
- Dual-path signal routing through YTF and low-band paths optimizes dynamic range and selectivity
Typical Applications
- Spectrum analysis across 100 Hz to 26.5 GHz
- Millimeter-wave measurements using external mixer configurations
- Broadband RF characterization and signal monitoring
- Modular system integration for laboratory and field measurements
Compatibility & Integration Designed specifically for Agilent/Keysight 70000 series modular measurement systems, including the 71209A Opt 001 spectrum analyzer and 71910A wide-bandwidth receiver. Installation requires rear panel cable connections (SMB and SMA flexible cables) and removal of existing RF sections using standard 8 mm hex-ball driver. Anti-static handling precautions required during module installation and servicing.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 Hz to 26.5 GHz | Voltage / Current Range: 198 to 264 V ac, 50/60 Hz |
HP 70910A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP 70910A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP 70910A price
This HP 70910A is listed at $2,649. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP 70910A calibration cost
NIST-traceable calibration for the HP 70910A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
