HP / Agilent 83595C RF plug-in provides a 10 MHz to 26.5 GHz broadband coaxial swept +13 dBm
The HP/Agilent 83595C is an RF plug-in designed for broadband coaxial swept applications. It operates from 10 MHz to 26.5 GHz and offers a +13 dBm output power. Ideal for signal generation and testing in a wide range of RF applications.
- Model
- HP / Agilent 83595C
- Calibration
- Available on request
- Price
- $6,444
- Status
- In stock
- RFQ ref
- 83595C
This unit
The HP/Agilent 83595C is an RF plug-in module that delivers broadband coaxial swept signal generation from 10 MHz to 26.5 GHz with +13 dBm maximum output power. Designed for integration into compatible Agilent/HP 8360 Series sweep generator mainframes, this module provides dual modulation paths
AM and FM, each supporting both internal and external sources - along with full bandwidth and list sweep capabilities. The 50 Ohm input impedance and Type N female output connector enable straightforward integration into standard RF test systems. Control is accomplished through the mainframe's front panel and programmable interfaces including HP-IB/IEEE-488, eliminating the need for standalone instrumentation.
Technical Specifications
Frequency range: 10 MHz to 26.5 GHz
Output power: +13 dBm maximum
Output connector: Type N female
Input impedance: 50 Ohms
AM modulation: internal and external modes
FM modulation: internal and external modes
Sweep modes: full bandwidth and list sweep
Phase noise performance tied to host 8360 Series mainframe specifications
Harmonic distortion and spurious output dependent on mainframe and operating conditions
Key Features
Plug-in architecture enables flexible multi-band capability within a single mainframe
Dual modulation support accommodates both analog and modulated signal requirements
List sweep functionality allows rapid frequency stepping for automated test sequences
Phase noise performance scales with selected mainframe model
Typical Applications
Component characterization across X-band through K-band frequencies
RF system validation and receiver testing
Harmonic and intermodulation measurement
Modulation quality assessment and signal analysis
Compatibility & Integration The 83595C is compatible with Agilent/HP 8360 Series sweep generators including the 83610A, 83620A/B/L, 83630A/B/L, 83640A/B/L, and 83650A/B/L mainframes. Verify specific mainframe compatibility before deployment.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 10 MHz to 26.5 GHz | Power Range (dBm): '+13 dBm |
HP / Agilent 83595C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 83595C. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common HP / Agilent 83595C faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
HP / Agilent 83595C price
This HP / Agilent 83595C is listed at $6,443.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 83595C calibration cost
NIST-traceable calibration for the HP / Agilent 83595C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
