HP / Agilent 83620B Synthesized Swept-Signal Generator, 0.01 – 20 GHz,+13 dBm calibrated output
The HP/Agilent 83620B is a synthesized swept signal generator that delivers high performance and precision. It operates from 0.01 to 20 GHz with a calibrated output of +13 dBm. Ideal for demanding applications requiring accurate and reliable signal generation.
- Model
- HP / Agilent 83620B
- Calibration
- Available on request
- Price
- $5,500
- Status
- In stock
- RFQ ref
- 83620B
This unit
The HP/Agilent 83620B is a synthesized swept-signal generator delivering precision signal generation from 0.01 GHz to 20 GHz with +13 dBm calibrated output power. Built for research, development, and manufacturing environments, it combines frequency synthesis architecture with excellent stability and resolution for component and system validation.
Technical Specifications Frequency & Power
Frequency range: 0.01 GHz to 20 GHz
Calibrated output power: +13 dBm maximum
Power accuracy: ±1.0 dB typical across frequency and temperature range
Power resolution: 0.1 dB steps
Output impedance: 50 Ohms Signal Quality
Harmonic distortion: Better than -30 dBc above 1 GHz
Spurious outputs: Better than -60 dBc
Phase noise: Frequency-dependent; refer to manufacturer plots for detailed characteristics Modulation
AM: 400 Hz, 1 kHz internal modulation frequencies; 0–99% modulation depth (continuous); ±5% accuracy typical
FM: 400 Hz, 1 kHz internal modulation frequencies; continuously variable deviation Sweep Modes
List, logarithmic, and linear sweep modes
Variable sweep time for analysis flexibility
External, internal, or manual triggering Stability & Performance
Fast frequency switching for efficient test sequences
High amplitude stability across time and temperature
Excellent long-term and short-term frequency stability
Key Features
Front-panel user interface with manual parameter control
HP-IB (IEEE-488) remote interface with SCPI compatibility for automated systems
Operating temperature: 0°C to 55°C
Storage temperature: -40°C to 70°C
Humidity rating: Up to 95% RH at 25°C (non-condensing)
Power supply: 90–132 VAC or 195–264 VAC (selectable), 47–63 Hz
Power consumption: Less than 300 VA
Typical Applications Component and subsystem characterization across microwave frequencies; RF filter and amplifier testing; receiver sensitivity analysis; modulation accuracy verification; frequency response mapping via swept measurements.
Compatibility & Integration Integrates with standard ATE systems supporting HP-IB control. SCPI command set enables integration into automated test environments and measurement platforms.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 20 GHz | Power Range (dBm): '+13 dBm | Voltage / Current Range: <300 VA, 47–63 Hz, 90–132 VAC or 195–264 VAC (selectable) |
HP / Agilent 83620B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 83620B. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common HP / Agilent 83620B faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
HP / Agilent 83620B price
This HP / Agilent 83620B is listed at $5,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 83620B calibration cost
NIST-traceable calibration for the HP / Agilent 83620B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
