Agilent / Keysight 86601A RF section .01 to 110 MHz for 8660A/C
The Agilent/Keysight 86601A is an RF section module designed for use with the 8660A/C signal generators. It extends the frequency range of these generators from 0.01 to 110 MHz, enabling testing and calibration in lower frequency bands.
- Model
- HP 86601A
- Calibration
- Available on request
- Price
- $1,726
- RFQ ref
- 86601A
This unit
The Agilent/Keysight 86601A is an RF section module that expands the frequency coverage of 8660A and 8660C signal generators into the lower frequency spectrum. This plug-in unit enables signal generation and testing from 0.01 MHz to 110 MHz, addressing applications requiring precise low-frequency stimulus and measurement capabilities.
Technical Specifications
- Frequency Range: 0.01 MHz to 110 MHz
- Base Unit Compatibility: Agilent/Keysight 8660A and 8660C signal generators
Key Features The 86601A extends the operating range of compatible 8660-series generators into the VLF through low-HF bands. The module integrates directly with its host instrument, providing continuous frequency coverage across the specified range without external interconnection complexity.
Typical Applications
- Low-frequency signal generation and characterization
- RF circuit testing in the 0.01–110 MHz band
- Receiver sensitivity and selectivity measurements
- Audio and subsonic frequency stimulus
Compatibility & Integration Designed exclusively for the 8660A and 8660C platforms, the 86601A module plugs into the host generator to become an integral part of the signal source. No external power supplies or auxiliary equipment are required for operation.
Product Status This module is classified as obsolete and is no longer manufactured or sold by Keysight. Legacy units may remain eligible for repair and calibration services through authorized Keysight service channels. Complete technical documentation - including the original 1979 Operation and Technical Manual and Operating + Service Manual (86601-90027) - remains available to support existing installations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 MHz to 110 MHz |
HP 86601A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP 86601A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common HP 86601A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
HP 86601A price
This HP 86601A is listed at $1,725.6. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP 86601A calibration cost
NIST-traceable calibration for the HP 86601A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →