Fluke 99B Scopemeter Series II Handheld Oscilloscope
Fluke Digital Oscilloscopes. Bandwidth: ** 100 MHz, Resolution: ** 3 2/3 digits.
- Model
- Fluke 99B
- Calibration
- Available on request
- Price
- $760
- Status
- In stock
- RFQ ref
- 99B
This unit
The Fluke 99B Scopemeter Series II is a dual-channel handheld oscilloscope that integrates digital storage oscilloscope and digital multimeter functionality into a single field-service instrument. With 100 MHz bandwidth and 5 GS/s repetitive sampling capability, it captures and analyzes complex waveforms across two input channels. The device delivers 3 2/3-digit multimeter performance with true RMS AC measurements to 5 MHz, alongside oscilloscope acquisition modes including ScopeRecord™ for extended signal monitoring, envelope capture, glitch detection, and averaging. Its high-contrast display and Continuous Autoset function streamline troubleshooting in the field, while advanced waveform mathematics - add, multiply, filter, subtract, invert, integrate - enable detailed signal characterization.
Technical Specifications
Oscilloscope Bandwidth: 100 MHz
Sample Rates: 5 GS/s repetitive; 25 MS/s single shot
Record Length: Up to 30k samples (ScopeRecord™, 1 channel at 20 ms/div); 15k samples (2 channels); 512 samples per channel at faster timebases
Timebase Range: 5 ns/div to 60 s/div
Triggering: Edge, video, event, and N-cycle modes on input A, B, or external source; video support includes NTSC, PAL, PAL/M, SECAM with line frequencies 14 kHz to 65 kHz
Multimeter Resolution: 3 2/3 digits
Multimeter Accuracy (18°C to 28°C): DC ±0.5%; AC ±2–3% to 20 kHz; general ±(1% of reading + 1 count); temperature coefficient +0.1× specified accuracy per °C outside calibration range
Cursor Measurements: Up to 5 simultaneous, including Vrms, frequency, Vmean, risetime, Vpeak-peak, phase, and timing intervals
Memory: 20 waveforms; 40 setups; 10 screens; 30k ScopeRecord™ buffer
Interfaces: Optically isolated PC/printer port with RS-232 output
Power: Battery operation, approximately 4 hours
Operating Temperature: 0°C to 28°C
Key Features
ScopeRecord™ mode for long-term signal capture and trend analysis
True RMS AC measurements to 5 MHz
Dual-channel 2-input configuration
Waveform mathematics for signal manipulation and filtering
Video triggering with selectable line and field options
Glitch detection and envelope acquisition modes
Typical Applications
Field service and on-site troubleshooting
Power supply and motor drive analysis
Video signal characterization
Component and circuit validation
Frequency and timing measurements
Compatibility & Integration The instrument connects to external systems via optically isolated RS-232 interface, enabling remote data transfer and integration with PC-based analysis workflows. Supplied with two 250 MHz voltage probe sets and 1000 V hard-point test leads.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 100 MHz | Voltage / Current Range: AC/DC voltage and current measurements (with optional probes) |
Fluke 99B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 99B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Fluke 99B price
This Fluke 99B is listed at $760. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 99B calibration cost
NIST-traceable calibration for the Fluke 99B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
