Exfo AXS-360-QUAD Fiber Certification Tester
Exfo Fiber Characterization Systems. Sensitivity: 6 × RMS noise level.
- Model
- Exfo AXS-360-QUAD
- Calibration
- Available on request
- Price
- $2,380
- Status
- In stock
- RFQ ref
- AXS-360-QUAD
This unit
The EXFO AXS-360-QUAD is a handheld fiber certification tester engineered for single-mode and multimode fiber optic network deployment and maintenance. It integrates a quad-wavelength light source and power meter to deliver automatic optical loss measurements, pass/fail analysis against industry standards, and physical layer testing up to 10 Gbit/s. The instrument operates across four wavelengths - 850 nm and 1300 nm for multimode, 1310 nm and 1550 nm for single-mode - with optional support for 1490 nm or 1625 nm configurations.
Technical Specifications Wavelengths & Fiber Support
Multimode: 850 nm, 1300 nm
Single-mode: 1310 nm, 1550 nm
Optional single-mode wavelengths: 1490 nm or 1625 nm (single port) or four wavelengths across two ports
Power meter supports: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1650 nm Optical Loss Measurement
Automatic loss measurements at multiple wavelengths
Compliant with TIA-568-B and ISO/IEC-11801 standards
Encircled flux compliance: IEC 61280-4-1
User-configurable thresholds
Loss Certification Wizard for guided measurement with manual cable length entry or sheath marking detection Light Source
Quad-wavelength design
CW mode operation
Laser safety: Class 1 or Class 3R per IEC 60825-1 and 21 CFR 1040.10/1040.11 Power Meter
Operating temperature: 23 °C ± 1 °C (specifications reference)
Standard connector: FC
Sensitivity: 6 × RMS noise level
Recommended calibration: Annual
Key Features
Pass/fail analysis with measured value tables and user-entered fiber length comparison
Retesting capability when measured loss exceeds budget
Supports both single-mode and multimode fiber without module changes
Optional Fiber Inspection Probe (FIP) for connector cleanliness verification
Optional Visual Fault Locator (VFL) for break detection
Typical Applications
Ethernet transmission testing up to 10 Gbit/s on SM and MM fiber
Standards compliance verification: 10GBASE-LX4, 10GBASE-L, 10GBASE-E, 10GBASE-S, 1000BASE-SX, 1000BASE-LX, 100BASE-FX, 10BASE-FB, 10BASE-FL, FDDI, ATM-155, ATM-622, Token Ring (4/16 Mbit/s), Fibre Channel (1062 Mbit/s)
Compatibility & Integration Testing qualified for ISO/IEC-11801 physical layer verification across enterprise and data center deployments.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1300 nm, 1310 nm, 1550 nm (quad-wavelength) |
Exfo AXS-360-QUAD — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Exfo AXS-360-QUAD. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Exfo AXS-360-QUAD price
This Exfo AXS-360-QUAD is listed at $2,380. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Exfo AXS-360-QUAD calibration cost
NIST-traceable calibration for the Exfo AXS-360-QUAD is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
