Kontron / Teknor Applicom cPCI-MXS64 6U CompactPCI 64-Bit System Processor
Kontron / Teknor Applicom Embedded Test Systems.
- Model
- Kontron / Teknor Applicom cPCI-MXS64
- Calibration
- Available on request
- Price
- $1,850
- Status
- In stock
- RFQ ref
- cPCI-MXS64
This unit
The Kontron/Teknor Applicom cPCI-MXS64 is a 6U CompactPCI 64-bit system processor board designed for high-availability industrial and embedded applications requiring performance. This single-slot, passively cooled, hot-swappable unit integrates into CompactPCI systems and targets datacom, telecom, and industrial imaging deployments - including CTI servers, VoIP equipment, and intelligent network switches.
Technical Specifications Processor & Memory
Intel Pentium III Low Power: 400 MHz or 500 MHz
Front Side Bus: 100 MHz
L2 Cache: 256 KB on-die
Chipset: Intel 440BX AGPset
SDRAM: up to 768 MB via three 168-pin DIMM sockets Bus & Storage
64-bit PCI bus with PCI-to-PCI transparent bridge
PICMG 2.0 Rev 3.0 compliant CompactPCI connectors
Dual-channel PCI Bus Master EIDE; four IDE Type 4 drives maximum
Optional bootable CompactFlash interface Power
Supply: 3.3V @ 4.5A max, 5V @ 3.5A max, 12V @ 0.1A max
Dissipation: 40 W maximum
Key Features
Hot-swappable design with passive cooling
IPMI controller for remote management
Ultra Wide LVD SCSI-2 LVDS: 16-bit, 80 MB/s
Dual 10/100Base-TX Ethernet ports (Intel 82559)
64-bit AGP CRT SVGA video controller with 2 MB VRAM
Four serial ports: three RS-232 (COM1, COM2, COM4); COM3 configurable
Two USB ports
Bi-directional parallel port: SPP, EPP, ECP modes
Floppy disk support: 360 KB to 1.44 MB, two drives
PMC mezzanine support; optional cMC series HD/FD mezzanine card
Typical Applications CTI and VoIP servers, broadband data switches, intelligent network appliances, and industrial imaging systems requiring low-power, high-reliability processor modules.
Compatibility & Integration 4HP single-slot form factor in 6U CompactPCI. Front I/O includes video, serial, and dual Ethernet on faceplate. Rear I/O options available. PICMG 2.0 Rev 3.0 compliant.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 MHz (FSB) | Voltage / Current Range: 12V @ 0.1A max, 3.3V @ 4.5A max, 5V @ 3.5A max |
Kontron / Teknor Applicom cPCI-MXS64 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kontron / Teknor Applicom cPCI-MXS64. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Kontron / Teknor Applicom cPCI-MXS64 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Kontron / Teknor Applicom cPCI-MXS64 price
This Kontron / Teknor Applicom cPCI-MXS64 is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kontron / Teknor Applicom cPCI-MXS64 calibration cost
NIST-traceable calibration for the Kontron / Teknor Applicom cPCI-MXS64 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
