Aeroflex CS25130 500.00MHz Signal Generator

Aeroflex Signal Generators. Frequency Range: 0.5 to 512 MHz in 10 octave ranges.

Model
Aeroflex CS25130
Calibration
Available on request
Price
$1,535
RFQ ref
CS25130
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Aeroflex CS25130 is a synthesized signal generator producing RF signals across a broad frequency span with output levels from +19 dBm to -145 dBm. Part of the Broadband Signal and Environment Generator (BSG) family, it delivers precise, stable signals for RF testing, calibration, and validation of communication systems and electronic devices.


Technical Specifications



  • Frequency Range: 0.5 to 512 MHz in 10 octave ranges; extends to 1024 MHz with Option 002 (internal frequency doubler)

  • Maximum Frequency: 500.00 MHz

  • Output Level Range: +19 dBm to −145 dBm

  • Amplitude Range: 4.5 mV to 5.5 V

  • Amplitude Flatness: ±1.5% to 4% of 50 kHz reference

  • Spurious-Free Dynamic Range (SFDR): 65 dB typical

  • Synthesized Frequency: Yes


Key Features



  • Synthesized frequency generation ensures stable, repeatable output across the operating range

  • Wide output level control spans 164 dB dynamic range

  • Selectable frequency doubler option enables coverage to 1024 MHz

  • Amplitude flatness specification maintains signal integrity across the frequency span

  • High SFDR performance minimizes spurious content in test signals


Typical Applications



  • RF subsystem testing and validation

  • Communication system calibration

  • Electronic device characterization

  • Signal path measurements

  • Environmental simulation for broadband RF scenarios


Compatibility & Integration The CS25130 integrates into test environments requiring multi-octave signal generation with precise amplitude control. Its synthesized architecture and output specifications position it for laboratory and production test setups demanding stable, low-distortion RF sources across the VHF and lower UHF bands.

Specifications

ParameterValue
Frequency Range0.5 to 512 MHz
0.5 to 1024 MHz with Option 002 | Power Range (dBm)'+19 dBm to −145 dBm | Voltage / Current Range: 4.5 mV to 5.5 V

Aeroflex CS25130 — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Aeroflex CS25130. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Common Aeroflex CS25130 faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.

Aeroflex CS25130 price

This Aeroflex CS25130 is listed at $1,534.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Aeroflex CS25130 calibration cost

NIST-traceable calibration for the Aeroflex CS25130 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →