Keysight / Agilent / HP E1411A 5.5-Digit Multimeter
Keysight / Agilent / HP VXI Modules. Resolution: 5.5-digit.
- Model
- Keysight / Agilent / HP E1411A
- Calibration
- Available on request
- Price
- $1,100
- Status
- In stock
- RFQ ref
- E1411A
This unit
The Keysight/Agilent/HP E1411A is a 5.5-digit VXI multimeter module designed for automated test systems requiring precision measurement and high-speed data acquisition. This C-size, 1-slot register-based instrument integrates directly into VXIbus mainframes and delivers flexible measurement capabilities across DC voltage, AC voltage, resistance (2-wire, 4-wire, offset-compensated), temperature, and frequency. Dual analog-to-digital converters - an integrating A/D for low-noise 5.5-digit resolution and a sampling A/D for high-speed 14-bit readings - enable operation across diverse measurement scenarios. With sampling rates to 13 kHz and external trigger support at up to 5 kHz minimum pulse width of 100 ns, the E1411A suits demanding laboratory and field-test environments. Autoranging simplifies operation, while software calibration and self-test diagnostics ensure instrument integrity. SCPI command language support enables seamless integration into automated test sequences. The module operates as a stand-alone instrument or combines with VXI relay or FET multiplexers to create multichannel scanning configurations. Balanced differential isolated inputs provide solid noise immunity. Safety and compliance certifications include IEC 1010-1, EN61010-1, CSA C22.2#1010.1, UL 3111, CISPR 11:1990/EN55011 (Group 1, Class A), EN50082-1:1992, with 4 kV contact discharge and 8 kV air discharge ESD protection per IEC 801-2, and 3 V/m radiated immunity per IEC 801-3.
Technical Specifications
Resolution: 5.5-digit
Sampling A/D: 14-bit at rates up to 13 kHz
Maximum trigger rate: 5 kHz
Minimum external trigger pulse width: 100 ns
Module format: C-size, 1-slot, VXI register-based
Input configuration: Balanced differential isolated
Key Features
Dual A/D architecture: integrating A/D for low-noise precision; sampling A/D for high-speed measurements
Measurement functions: DC voltage, AC voltage, 2-wire and 4-wire resistance, offset-compensated resistance, temperature (thermocouples, thermistors, RTDs), and frequency
Autoranging capability
Built-in timer pacer for flexible triggering
External trigger support with 100 ns minimum pulse width
SCPI command language programming
Software calibration
Self-test diagnostics
Typical Applications
Automated test and data acquisition systems
Multichannel scanning configurations using VXI multiplexers
Precision laboratory measurements
High-speed measurement sequences
Compatibility & Integration
Direct integration into VXIbus mainframes
Compatible with VXI relay and FET multiplexers (e.g., Keysight E1406A)
Stand-alone operation supported
Requires specific analog bus cabling for B-size multiplexer connections
Electrically identical to E1326A/B modules with different form factor
Keysight / Agilent / HP E1411A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keysight / Agilent / HP E1411A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Keysight / Agilent / HP E1411A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Keysight / Agilent / HP E1411A price
This Keysight / Agilent / HP E1411A is listed at $1,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keysight / Agilent / HP E1411A calibration cost
NIST-traceable calibration for the Keysight / Agilent / HP E1411A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
