Agilent/Keysight E1463A
Agilent / Keysight VXI Modules. Voltage: Less than 3 µV typical.
- Model
- Agilent / Keysight E1463A
- Calibration
- Available on request
- Price
- $1,500
- Status
- In stock
- RFQ ref
- E1463A
This unit
The Agilent/Keysight E1463A is a C-size, single-slot VXI switch module delivering 32 Form C (SPDT) channels with 5 Amp per-channel current handling. Register-based control enables rapid switching for power distribution, process control, and appliance test sequences. The module's sub-3 µV typical thermal offset voltage qualifies it for precision signal-switching and scanning applications where low noise is critical.
Non-latching relays maintain a defined state upon power loss. Connection is via QUIC screw terminal block; optional solder eye connectors are available. The main board accommodates user-installed series and shunt protection elements
MOVs, fuses, signal conditioning circuits - providing flexibility for harsh or sensitive environments.
Technical Specifications
- Module Type: VXI Switch Module, C-size, 1-slot
- Register-Based Architecture: Yes
- Channel Count: 32
- Channel Configuration: Form C (SPDT)
- Current Rating: 5 Amp per channel
- Thermal Offset Voltage: Less than 3 µV typical
- Relay Type: Non-latching
Key Features
- High current capacity supports demanding power-switching loads up to 5 Amps
- Low thermal offset enables measurement-grade signal routing without offset nulling
- QUIC screw terminal block for direct field wiring
- Optional solder eye connectors for PCB integration
- On-board provisions for series and shunt circuit protection and signal conditioning
- Non-latching relay design ensures safe, predictable idle state
Typical Applications
- Power distribution and on/off control in manufacturing automation
- Appliance and device pass/fail testing
- Process control switching matrices
- Low-level analog signal scanning and multiplexing
- Sensor and transducer measurement networks
Compatibility & Integration
- VXIbus register-based architecture with SCPI command support
- VXI plug&play driver availability
- Mounts in any standard VXI mainframe
- User documentation and service manuals available
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 125V, 5A per channel |
Agilent / Keysight E1463A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight E1463A. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight E1463A faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Agilent / Keysight E1463A price
This Agilent / Keysight E1463A is listed at $1,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight E1463A calibration cost
NIST-traceable calibration for the Agilent / Keysight E1463A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
