JDS Uniphase JDSU HA9 HA097+20KSU1 Programmable Attenuator
JDS Uniphase/JDSU Optical Attenuators. Resolution: 0.01 dB, Accuracy: ±0.1 dB.
- Model
- JDS Uniphase/JDSU HA9/HA097+20KSU1
- Calibration
- Available on request
- Price
- $2,930
- Status
- In stock
- RFQ ref
- HA9/HA097+20KSU1
This unit
The JDS Uniphase HA9/HA097+20KSU1 is an extended-range programmable optical attenuator engineered for precise attenuation control across broad wavelength spans. It delivers up to 100 dB of attenuation at 0.01 dB resolution with ±0.1 dB accuracy, supporting input power levels to 200 mW. The instrument operates across 1200–1700 nm (standard) or 750–1700 nm (optional), with wavelength dependence under ±0.05 dB across the C-band.
Technical Specifications
- Attenuation Range: Up to 100 dB
- Resolution: 0.01 dB
- Accuracy: ±0.1 dB
- Repeatability: 0.01 dB
- Wavelength Range: 1200–1700 nm (standard); 750–1700 nm (optional)
- Wavelength Dependence: 90 dB infinite attenuation
- Fiber Type: Single-mode 9/125 µm (multimode available for HA9W)
- Connector: SC/APC on front-panel bulkheads
Key Features
- SCPI/HP8156A-compatible command set enables deterministic remote control
- Triple interface access: front-panel keyboard, GPIB (IEEE 488.2), and RS232
- Built-in calibration and offset functions for signal conditioning
- Low insertion loss with cavity effects virtually eliminated
- Minimal spectral ripple suitable for CATV AM systems
- 5 V driver key on front panel for external or internal switch control
Typical Applications
- Power meter testing and characterization
- Optical communication system validation
- Power meter linearity calibration
- Laboratory and general test environments
Compatibility & Integration Optional couplers (2/98, 10/90, 30/70, 50/50) and a 1:2 optical fiber switch (SW12) expand functionality for output tap or dual input/output configurations.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+5 V (driver key) | Wavelength Range: 1200–1700 nm (standard) |
JDS Uniphase/JDSU HA9/HA097+20KSU1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase/JDSU HA9/HA097+20KSU1. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase/JDSU HA9/HA097+20KSU1 faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDS Uniphase/JDSU HA9/HA097+20KSU1 price
This JDS Uniphase/JDSU HA9/HA097+20KSU1 is listed at $2,930. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase/JDSU HA9/HA097+20KSU1 calibration cost
NIST-traceable calibration for the JDS Uniphase/JDSU HA9/HA097+20KSU1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
