Interface Technology IO110VXI 128-Channel CMOS Digital I/O Module
Interface Technology VXI Modules. Channels: ** 128 I/O channels per module, Voltage: ** Vih 2.2 V min, Current: ** 120 mA.
- Model
- Interface Technology IO110VXI
- Calibration
- Available on request
- Price
- $1,650
- Status
- In stock
- RFQ ref
- IO110VXI
This unit
The Interface Technology IO110VXI is a 128-channel CMOS digital I/O module designed for high-density signal interfacing in industrial and automation applications. It delivers simultaneous read/write capability across all 128 channels, software-configurable I/O groups, and multiple logic format support including CMOS, TTL, TTL Open Collector, Differential TTL, and Switched HV outputs. The module integrates on-board processing, external handshaking, and VXI TTLTRG synchronization for multi-module operation.
Technical Specifications
Channels: 128 I/O channels per module
Channel Configuration: Groups of 8 channels software-configurable as input or output
Logic Formats: CMOS, TTL, TTL Open Collector, Differential TTL, Switched HV outputs
Data Fields: User-defined 1 to 32 bits wide; multiple fields supported
Simultaneous Operations: Full 128-bit latched reads and double-latched writes ensure all output channels transition simultaneously
Handshaking: External I/O handshaking with 4 strobes per connector; memory-backed pins for timing control
Control Lines: 4 tri-state control/output enable inputs per connector
Connectors: Four 50-pin IDC connectors on front panel
Termination: User-configurable I/O termination
Isolation: Optical, 3750 V
Electrical Characteristics
Input Voltage: Vih 2.2 V min, Vil 0.8 V max
Output Current (Standard): −40 mA to +40 mA
Output Current (Open-Collector): −128 mA
Carry Current: 120 mA
Differential TTL: Vol 0.50 V, Voh 2.5 V, Iol 20 mA, Ioh −20 mA max, skew 21 ns max per card (50 ns added across multiple cards), rise/fall time 14 ns typical
Switched HV: Up to 100 V; sourced from user supply or backplane options (+5, ±12, ±24 V)
Key Features
Tri-state output control for bus emulation
VXI TTLTRG synchronization for linked multi-module operation
On-board processor for autonomous operation
Simultaneous reads and writes on any field size or count
Typical Applications Industrial automation, digital signal acquisition, multi-channel control systems, and real-time data capture requiring high channel density and deterministic timing.
Compatibility & Integration Part of the IO50–IO130 family. Operates within VXI systems utilizing TTLTRG for cross-module triggering.
Interface Technology IO110VXI — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Interface Technology IO110VXI. Calibration covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Interface Technology IO110VXI faults: relay contact wear, DAC/ADC drift, VXI backplane connector oxidation. Common faults include relay contact wear, DAC or ADC gain drift, and VXI backplane edge connector oxidation. Most modules are repaired at the component level with full post-repair verification in a C-size or D-size mainframe.
Interface Technology IO110VXI price
This Interface Technology IO110VXI is listed at $1,650. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Interface Technology IO110VXI calibration cost
NIST-traceable calibration for the Interface Technology IO110VXI is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers all module-specific parameters per manufacturer datasheet, output accuracy and linearity, frequency accuracy, and VXI register and trigger bus compliance. Turnaround is 1 to 3 business days after receipt. See full calibration details →
