Abaco Systems / SBS / Greenspring IP-Digital48 / IP-DualPI/T IndustryPack
IndustryPack module with digital I/O and counter/timer functions.
- Model
- Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T
- Calibration
- Available on request
- Price
- $250
- Status
- In stock
- RFQ ref
- IP-Digital48/IP-DualPI/T
This unit
The Abaco Systems IP-Digital48 / IP-DualPI/T IndustryPack is a jumper-configurable digital I/O and counter/timer module for embedded systems requiring flexible input/output control. Select IP-Digital48 configuration for 48 general-purpose digital I/O lines, or IP-DualPI/T configuration to access advanced timer I/O, interrupt generation, DMA, and hardware-mediated double-buffered data transfer.
Technical Specifications
- Digital I/O Lines: 48 lines (IP-Digital48) or 32 lines (IP-DualPI/T); individually configurable as input or output
- Counter/Timer Functions: 24-bit timer; two 24-bit synchronous counters (IP-DIGITAL482 variant)
- Buffering: Double-buffered input and output supported
- Data Transfer: DMA supported; 8 or 16-bit wide external data transfer; hardware-mediated double-buffered transfer
- Interrupts: Edge or level-sensitive interrupt generation per I/O line
- Interface Connectors: 50-conductor flat cable (IP-DIGITAL482); TTL-level inputs/outputs
- ESD Protection: LineSafe ESD protection on all lines (IP-UD-E-48)
- Power: 64 mA @ +15V/-5V (IP-UD)
- Form Factor: Single-wide IndustryPack
Key Features
- Individual input/output configuration per line with programmable modes
- Timer I/O for time-critical applications
- DMA support for high-throughput data streaming
- Hardware-managed double buffering eliminates gaps in data acquisition
- TTL-level signal compatibility
- Windows NT drivers available (IP-UD-E-48, IP-UD)
- Subroutine library provided for IP-UD
Typical Applications Digital control and monitoring in industrial automation, test and measurement, and real-time embedded systems where programmable I/O and timing functions are required.
Compatibility & Integration VITA 4-1995 IndustryPack standard compliant. IP-DIGITAL482 is a drop-in replacement for IP-DIGITAL-48.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+15V/-5V @ 64 mA |
Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T. Calibration covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T faults: ESD-damaged input protection, failed driver ICs, connector pin damage. Most failures involve ESD-damaged input protection circuitry, failed logic driver ICs, or mechanical connector pin damage. Board-level component replacement is standard practice.
Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T price
This Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T is listed at $250. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T calibration cost
NIST-traceable calibration for the Abaco Systems / SBS / Greenspring IP-Digital48/IP-DualPI/T is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers per-channel threshold accuracy, input leakage current, logic level high/low margins, and signal timing verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
