JDSU MAP-200 W mTBF-A1 1520-1630nm Tunable Bandpass Filter Module BERT
The JDSU MAP-200 W mTBF-A1 is a tunable bandpass filter module designed for BERT (Bit Error Rate Tester) applications. It operates in the 1520-1630nm wavelength range, offering precise filtering for optical signal analysis. This module is ideal for characterizing optical components and systems in telecommunications and photonics research.
- Model
- JDSU MAP-200 W mTBF-A1
- Calibration
- Available on request
- Price
- $8,480
- Status
- In stock
- RFQ ref
- MAP-200 W mTBF-A1
This unit
The JDSU MAP-200 W mTBF-A1 is a tunable bandpass filter module designed for Bit Error Rate Tester (BERT) integration. Operating across the 1520–1630 nm wavelength range, it delivers precise optical signal filtering essential for accurate characterization of optical components and telecommunications systems. The module enables wavelength-selective isolation and dynamic passband adjustment without hardware modification, supporting detailed signal analysis across the C-band spectrum.
Technical Specifications
- Product Name: JDSU MAP-200 W mTBF-A1 Tunable Bandpass Filter Module
- Filter Type: Tunable Bandpass Filter
- Wavelength Range: 1520 nm to 1630 nm
- Application: Bit Error Rate Testing (BERT)
Key Features
- Tunable center wavelength across the full 1520–1630 nm range
- Dynamic passband adjustment for multi-wavelength signal analysis
- Precise wavelength selection for isolated optical signal examination
- Direct integration into BERT measurement frameworks
- Support for optical transmitter, receiver, amplifier, and passive component characterization
- Verification and troubleshooting of optical communication system performance
Typical Applications
- Telecommunications research and development laboratories
- Optical component manufacturing test environments
- Photonics research and technology development
- High-speed optical network performance analysis
Compatibility & Integration The MAP-200 W mTBF-A1 interfaces with BERT systems and optical test equipment supporting compatible form factors and control protocols. Specific compatibility with host BERT platforms depends on available I/O and communication mechanisms.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1520 nm to 1630 nm |
JDSU MAP-200 W mTBF-A1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDSU MAP-200 W mTBF-A1. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDSU MAP-200 W mTBF-A1 faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
JDSU MAP-200 W mTBF-A1 price
This JDSU MAP-200 W mTBF-A1 is listed at $8,480. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDSU MAP-200 W mTBF-A1 calibration cost
NIST-traceable calibration for the JDSU MAP-200 W mTBF-A1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
