Anritsu MN924C Variable Optical Attenuator Calibrated
The Anritsu MN924C is a calibrated variable optical attenuator designed for precise control of optical signal power. It features a wide attenuation range, low insertion loss, and high accuracy, making it suitable for testing and measurement applications in fiber optic communication systems.
- Model
- Anritsu MN924C
- Calibration
- Available on request
- Price
- $755
- Status
- In stock
- RFQ ref
- MN924C
This unit
The Anritsu MN924C is a calibrated variable optical attenuator engineered for precise optical signal power control in fiber optic communication systems. It employs combined step and continuous attenuation mechanisms to deliver highly accurate adjustments across single-mode fiber networks. Designed for operation at 1.3 µm and 1.55 µm wavelengths, the MN924C provides the control resolution required in laboratory and field testing environments.
Note: This model was discontinued in July 2004; the MN9605C is the recommended replacement.
Technical Specifications
- Model: MN924C
- Manufacturer: Anritsu
- Product Type: Variable Optical Attenuator (Calibrated)
- Operating Wavelengths: 1.3 µm and 1.55 µm
- Fiber Type: Single-mode optical fibers
- Attenuation Adjustment: Step and continuous combined control
Key Features
- Dual-wavelength operation supports common telecommunications bands
- Combined attenuation approach enables fine-grain power control
- Calibrated performance for traceable measurements
- Single-mode fiber compatibility ensures low-loss operation
Typical Applications
- Fiber optic system characterization and testing
- Optical signal conditioning in C-band and L-band measurements
- Power level verification and validation in telecommunications networks
- Laboratory environments requiring precise attenuation control
Compatibility & Integration The MN924C integrates with single-mode fiber infrastructure operating at standard telecommunications wavelengths. Users requiring connector specifications or modern alternatives should evaluate the MN9605C, which offers current-generation PC-type connectors with ≥40 dB return loss performance.
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1.3 µm and 1.55 µm |
Anritsu MN924C — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MN924C. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu MN924C faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
Anritsu MN924C price
This Anritsu MN924C is listed at $755. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MN924C calibration cost
NIST-traceable calibration for the Anritsu MN924C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
